Difference between revisions of "Stronghold Meeting -07-Feb-2016"
From DEW Robotics
(Created page with '=='''Competition Season Meeting'''== <!-- This is the meeting information table --> {|border=1 cellpadding="10" !Meeting Date !!Meeting Time !!Location !!Attendees |- | | | TC...') |
MaiKangWei (talk | contribs) (→Mechanical) |
||
Line 13: | Line 13: | ||
==Mechanical== | ==Mechanical== | ||
+ | During driving practice, one of the 1/2" hexagonal flanged bearings (bearing the end of a gearbox output shaft) failed catastrophically. Failure originated in the inner ring of the bearing, which cracked at the hex points. These are natural weak points. This was repaired by replacement on the running drive train (Deux). On Prime's drive train, which was being assembled, the decision was made to turn the ends of the hex drive shafts down to 1/2" round so that stronger round flanged bearings could be used in lieu of the hexagonal bearings. This was completed during the meeting and Prime's drive sides assembled, excluding belts. Mass of drive side is 14.7 lb. | ||
==Programming== | ==Programming== |
Revision as of 12:28, 8 February 2016
Contents
Competition Season Meeting
Meeting Date | Meeting Time | Location | Attendees |
---|---|---|---|
TCHS Brandywine |
CAD & Design
Mechanical
During driving practice, one of the 1/2" hexagonal flanged bearings (bearing the end of a gearbox output shaft) failed catastrophically. Failure originated in the inner ring of the bearing, which cracked at the hex points. These are natural weak points. This was repaired by replacement on the running drive train (Deux). On Prime's drive train, which was being assembled, the decision was made to turn the ends of the hex drive shafts down to 1/2" round so that stronger round flanged bearings could be used in lieu of the hexagonal bearings. This was completed during the meeting and Prime's drive sides assembled, excluding belts. Mass of drive side is 14.7 lb.
Programming
Strategy
Field Elements
Other
Recorded by: | Date: | Journal Editor: | Date: |
---|---|---|---|