Difference between revisions of "DEWBOT IX Week Three Build Season Photo Gallery"
From DEW Robotics
MaiKangWei (talk | contribs) (→Sunday January 20, 2013) |
MaiKangWei (talk | contribs) (→Monday January 21, 2013) |
||
| Line 26: | Line 26: | ||
==Monday January 21, 2013== | ==Monday January 21, 2013== | ||
<gallery widths=250 heights=250 perrow=3> | <gallery widths=250 heights=250 perrow=3> | ||
| − | Image:DB9_130121_csm-1.jpg| | + | Image:DB9_130121_csm-1.jpg|Climber prototype (early) |
| + | Image:DB9_130121_csm-2.jpg|Chassis frame elements on the mill | ||
| + | Image:DB9_130121_csm-3.jpg|Tobi, Michael Geldart & Ian working on the climber | ||
| + | Image:DB9_130121_csm-4.jpg|Fedora survey | ||
| + | Image:DB9_130121_csm-5.jpg|work continuing on the climber | ||
| + | Image:DB9_130121_csm-6.jpg|Gary Deaver at the feeder station | ||
</gallery> | </gallery> | ||
Revision as of 12:08, 22 January 2013
Contents
Sunday January 20, 2013
2013 pivot (SolidWorks rendering)
Brad & Patrick C press pinions onto steering motors
Pressing on a pinion
Kira drilling countersinks
Countersunk pivot braces
Kenneth
Molly on lathe
Pivot module top plates with steering motors installed
Pivot module bottom plates with bearings installed
Douglas installing pyramis goal
Kenneth
Hannah & Rachael
Shooter prototype
Pyramid goal
Frank's lesson
Pivot module parts
Bow-tie wheel for caterpillar drive
Monday January 21, 2013
Climber prototype (early)
Chassis frame elements on the mill
Tobi, Michael Geldart & Ian working on the climber
Fedora survey
work continuing on the climber
Gary Deaver at the feeder station
