Difference between revisions of "DEWBOT IX Week Three Build Season Photo Gallery"
MaiKangWei (talk | contribs) (→Tuesday January 22, 2013) |
MaiKangWei (talk | contribs) (→Tuesday January 22, 2013) |
||
| Line 40: | Line 40: | ||
Image:DB9_130122_csm-3.jpg|Kira, Rich Kulik & Patrick C working on shooter | Image:DB9_130122_csm-3.jpg|Kira, Rich Kulik & Patrick C working on shooter | ||
Image:DB9_130122_csm-4.jpg|Session Linsey & Fatima | Image:DB9_130122_csm-4.jpg|Session Linsey & Fatima | ||
| − | Image:DB9_130122_csm-5.jpg|Molly | + | Image:DB9_130122_csm-5.jpg|Molly milling lightweighting holes into chassis frame elements |
Image:chassis_frame_weldment.jpg|Chassis frame weldment (subject to some small changes) | Image:chassis_frame_weldment.jpg|Chassis frame weldment (subject to some small changes) | ||
</gallery> | </gallery> | ||
Revision as of 04:25, 23 January 2013
Contents
Sunday January 20, 2013
2013 pivot (SolidWorks rendering)
Brad & Patrick C press pinions onto steering motors
Pressing on a pinion
Kira drilling countersinks
Countersunk pivot braces
Kenneth
Molly on lathe
Pivot module top plates with steering motors installed
Pivot module bottom plates with bearings installed
Douglas installing pyramis goal
Kenneth
Hannah & Rachael
Shooter prototype
Pyramid goal
Frank's lesson
Pivot module parts
Bow-tie wheel for caterpillar drive
Monday January 21, 2013
Climber prototype (early)
Chassis frame elements on the mill
Tobi, Michael Geldart & Ian working on the climber
Fedora survey
work continuing on the climber
Gary Deaver at the feeder station
Tuesday January 22, 2013
Molly
Kevin
Kira, Rich Kulik & Patrick C working on shooter
Session Linsey & Fatima
Molly milling lightweighting holes into chassis frame elements
Chassis frame weldment (subject to some small changes)
