Difference between revisions of "DEWBOT XII Portcullis Lift"
From DEW Robotics
MaiKangWei (talk | contribs) (→Portcullis Lift Objectives) |
MaiKangWei (talk | contribs) (→Portcullis Lift Specifications) |
||
Line 9: | Line 9: | ||
==Portcullis Lift Specifications== | ==Portcullis Lift Specifications== | ||
− | + | *Raise the Portcullis - allowing crossing | |
+ | *Lower (2) raised Cheval de Frise sections - allowing crossing | ||
+ | *Robot must cross Portcullis & Cheval de Frise facing forward (in the direction of shooting) | ||
+ | *Mechanism cannot extend beyond 15 inches from the frame perimeter | ||
==Design Considerations== | ==Design Considerations== |
Revision as of 14:11, 8 May 2016
During our strategy development, we determined that DEWBOT XII needed to be able to go through the Portcullis & Cheval de Frise, both in teleop and autonomous. The Portcullis Lift is the mechanical device enabling this.
Contents
Portcullis Lift Objectives
- Raise the Portcullis and allow the robot to pass through
- Lower two sections of the Cheval de Frise, allowing the robot to cross over
- Perform these operations in either autonomous or teleop mode
- Perform crossing in such a way as to support scoring in high goal during autonomous
Portcullis Lift Specifications
- Raise the Portcullis - allowing crossing
- Lower (2) raised Cheval de Frise sections - allowing crossing
- Robot must cross Portcullis & Cheval de Frise facing forward (in the direction of shooting)
- Mechanism cannot extend beyond 15 inches from the frame perimeter