Difference between revisions of "STEAMworks Meeting - 12-Feb-2017"
From DEW Robotics
(→CAD & Design) |
(→CAD & Design) |
||
(One intermediate revision by the same user not shown) | |||
Line 3: | Line 3: | ||
==CAD & Design== | ==CAD & Design== | ||
− | "Talon tables" or supports for the talons over each of the pivots were finished in design, and holes were added to the chassis in SolidWorks. | + | "Talon tables" or supports for the talons over each of the pivots were finished in design, and holes were added to the chassis in SolidWorks. - Madi Wyatt |
+ | |||
+ | '''CAM Lead- Patrick''' | ||
+ | |||
+ | The last of the CVT Swerve Tension Pulleys were printed and delivered to mechanical. Upon request of one of the team co-captains, I printed half of a case to hold the Raspberry Pi 3 on the electronics board. Although, I am holding off on the second half because its use is undecided due to surrounding components and hole locations. | ||
==Mechanical== | ==Mechanical== |
Latest revision as of 18:18, 18 February 2017
Contents
CAD & Design
"Talon tables" or supports for the talons over each of the pivots were finished in design, and holes were added to the chassis in SolidWorks. - Madi Wyatt
CAM Lead- Patrick
The last of the CVT Swerve Tension Pulleys were printed and delivered to mechanical. Upon request of one of the team co-captains, I printed half of a case to hold the Raspberry Pi 3 on the electronics board. Although, I am holding off on the second half because its use is undecided due to surrounding components and hole locations.