DEWBOT VIII Week Five Build Season Photo Gallery
Contents
Sunday February 5, 2012
Nicole soldering leads onto angle sensors
Angle sensors
Sasha, Molly & Yahya
Mike Rizzo quote - I read and it makes understand
Patrick C mixing up epoxy
Kira & DJ
Partrick C & Gary Deaver applying epoxy to shooter panel fiber
Molly & Sasha
Faith
Douglas ready to weld...
...and welding
Angle sensor...
...mounting...
...details
SolidWorks image of the robot - as currently designed
Monday February 6, 2012
Robot in CAD (SolidWorks)
Yahya with deux (with wheels)
Deux
Bridge arm crew
Tommy on the lathe
Gary Deaver mounting angle sensors
Tuesday February 7, 2012
Keith Williams & Douglas
(4) complete Pivot Modules with mounting hardware - 34.5 lbm (versus 35.0 lbm anticipated)
Manas & Yash carry deux
Deux
Keith Williams & Douglas
welds
Douglas welding
Julie Christopher, Patrick D & DJ
Keith Williams welding
Wednesday February 8, 2012
Nicole & Lucy
Jack drilling set screw holes
Manas
Welding setup
Douglas & Keith
Bridge arm test
Rich Kulik & Mike Rizzo
Lift rail ties
CAD detail of lift wheel
Thursday February 9, 2012
Ian
Prime chassis frame
Prime chassis frame
Keith Williams & Dougles
Preheating frame prior to welding
Douglas welding
Gary Deaver, Patrick C & Ian working on shooter
Douglas welding
Douglas welding
Friday February 10, 2012
Siri Maley
Douglas & Kieth Williams
Shooter Side - the look of carbon fiber - shiney!
Varun putting the heat on
Work clamped in mill
Molly & Sasha - mom dressed them the same today
Faith McKown & Julie Kulik
Gary Deaver & John Weissman
Julie Kulik, Gary Deaver & John Weissman with shooter
Shooter taking shape
Douglas
Kieth Williams & Douglas
Milling bearing blocks
Julie Kulik & John Weissman with shooter
Pneumatic wheel support on Prime
Shooter
Shooter motor mount
Saturday February 11, 2012
Nicole holding the first of many electronics panels
Aligning parts prior to welding
Gary Deaver & Siri Maley work on the shooter
Patrick C using rivet gun
Douglas welding
Frame with bits awaiting welding
Ian & Quinn broaching keyways
Molly
David Moyer, Siri Maley, Gary Deaver & John Weissman
Constructing a support scaffold for the shooter
Shooter in scaffold
Using (home-made) plumb-bobs to position the shooter relative to the chassis
Ian uses a hair dryer to cure epoxy putty filling tops of shooter support tubes
Clem McKown checks frame position
Curing epoxy putty
Andrew, Sasha & Nicole at Mill
