Difference between revisions of "DEWBOT VIII Week Six Build Season Photo Gallery"
From DEW Robotics
MaiKangWei (talk | contribs) (→Sunday February 12, 2012) |
MaiKangWei (talk | contribs) (→Sunday February 12, 2012) |
||
| Line 3: | Line 3: | ||
Image:DB8_120212_csm-1.jpg|Siri Maley welding shooter support tubes into chassis | Image:DB8_120212_csm-1.jpg|Siri Maley welding shooter support tubes into chassis | ||
Image:DB8_120212_csm-2.jpg|Yahya | Image:DB8_120212_csm-2.jpg|Yahya | ||
| − | Image:DB8_120212_csm-3.jpg|Programmers John Stumpo, | + | Image:DB8_120212_csm-3.jpg|Programmers John Stumpo, Michael M & DJ |
Image:DB8_120212_csm-4.jpg|Keith Williams welding ''Prime'' chassis | Image:DB8_120212_csm-4.jpg|Keith Williams welding ''Prime'' chassis | ||
Image:DB8_120212_csm-5.jpg|welding the pinch bar in place | Image:DB8_120212_csm-5.jpg|welding the pinch bar in place | ||
Revision as of 12:20, 13 February 2012
Contents
Sunday February 12, 2012
Siri Maley welding shooter support tubes into chassis
Yahya
Programmers John Stumpo, Michael M & DJ
Keith Williams welding Prime chassis
welding the pinch bar in place
Very cold Nicole with Scott Featherman
Robot on scale (25.6 lbm for chassis frame & shooter
Matt Klufas & Patrick C on the lathe
Lift wheel mounted
Patrick C making frame adjustments with a hack saw
Mike Rizzo, Lucy, Patrick C, Siri Maley & Scott Featherman
Patrick still cutting
Patrick C
Lucy, Yahya & Patrick C
Siri wearing the shooter hat
Lift wheel & Beater Bar pulley shaft (sans pulleys)
Lift wheel & Pneumatic wheel drive
Chassis
Shooter
Beater Bar pulley shaft
Ball lift drive pulley
