Difference between revisions of "DEWBOT VIII Week Three Build Season Photo Gallery"

From DEW Robotics
Jump to: navigation, search
(Created page with '==Sunday January 22, 2012== <gallery widths=250 heights=250 perrow=3> Image:DB8_120122_csm-1.jpg| </gallery> ==Monday January 23, 2012== <gallery widths=250 heights=250 perrow=3...')
 
(→‎Friday January 27, 2012)
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Sunday January 22, 2012==
 
==Sunday January 22, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120122_csm-1.jpg|
+
Image:DB8_120122_csm-1.jpg|Pivot sides & top in mill (milled from (1) piece of aluminum
 +
Image:DB8_120122_csm-2.jpg|Pivot braces
 +
Image:DB8_120122_csm-3.jpg|Molly cleaning out milled metal
 +
Image:DB8_120122_csm-4.jpg|Lucy & Kira
 +
Image:DB8_120122_csm-5.jpg|Lucy & Kira
 +
Image:DB8_120122_csm-6.jpg|Pivot braces
 +
Image:DB8_120122_csm-7.jpg|Pivot braces
 +
Image:DB8_120122_csm-8.jpg|Milled pivot parts
 +
Image:DB8_120122_csm-9.jpg|Pivot tops
 +
Image:DB8_120122_csm-10.jpg|Pivot side (shiney!)
 +
Image:DB8_120122_csm-11.jpg|Pivot sides
 +
Image:DB8_120122_csm-12.jpg|Pivot tops
 +
Image:DB8_120122_csm-13.jpg|Lift debate
 +
Image:DB8_120122_csm-14.jpg|Patrick C, Yahya & Gary Deaver lubricate steering motor gearboxes
 +
Image:DB8_120122_csm-15.jpg|A steering motor gearbox getting lubrucated
 +
Image:DB8_120122_csm-16.jpg|Kira, Lucy & Julie Kulik
 +
Image:DB8_120122_csm-17.jpg|Patrick C
 +
Image:DB8_120122_csm-18.jpg|Bridge deployer
 
</gallery>
 
</gallery>
  
 
==Monday January 23, 2012==
 
==Monday January 23, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120123_csm-1.jpg|
+
Image:DB8_120123_csm-1.jpg|Keith Williams observes as Kira and Nicole remove [[DEWBOT VII]]'s right rear pivot
 +
Image:DB8_120123_csm-2.jpg|Rich Kulik
 +
Image:DB8_120123_csm-3.jpg|Douglas with wheel tread
 +
Image:DB8_120123_csm-4.jpg|Yahya punching mounting holes
 +
Image:DB8_120123_csm-5.jpg|Wheel
 +
Image:DB8_120123_csm-6.jpg|Kira cutting ½" 7075 Al rod for pivot transfer axles
 +
Image:DB8_120123_csm-7.jpg|Yash grinding
 +
Image:DB8_120123_csm-8.jpg|Yash, Douglas & Keith Williams
 +
Image:DB8_120123_csm-9.jpg|Sasha & Molly bending conduit...
 +
Image:DB8_120123_csm-10.jpg|...a little further yet...
 +
Image:DB8_120123_csm-11.jpg|...done!
 +
Image:DB8_120123_csm-12.jpg|Pivot wheel
 +
Image:DB8_120123_csm-13.jpg|Douglas & Keith Williams
 +
Image:DB8_120123_csm-14.jpg|Lift prototype...
 +
Image:DB8_120123_csm-15.jpg|...number 218
 
</gallery>
 
</gallery>
  
 
==Tuesday January 24, 2012==
 
==Tuesday January 24, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120124_csm-1.jpg|
+
Image:DB8_120124_csm-1.jpg|Yahya with Gary Deaver
 +
Image:DB8_120124_csm-2.jpg|Boring timing pulleys
 +
Image:DB8_120124_csm-3.jpg|Faith McKown up ladder
 +
Image:DB8_120124_csm-4.jpg|Welding crew - Yash, Douglas, Keith Williams & Manas
 +
Image:DB8_120124_csm-5.jpg|Sasha & Ben Kellom
 +
Image:DB8_120124_csm-6.jpg|Molly & Sasha - modifying lift prototype
 +
Image:DB8_120124_csm-7.jpg|Ben Kellon, Sasha & Molly
 +
Image:DB8_120124_csm-8.jpg|Yahya on lathe
 +
Image:DB8_120124_csm-9.jpg|Lift / shooter prototype test (successful)
 
</gallery>
 
</gallery>
  
 
==Wednesday January 25, 2012==
 
==Wednesday January 25, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120125_csm-1.jpg|</gallery>
+
Image:DB8_120125_csm-1.jpg|Molly deburs pivot module bottom plates
 +
Image:DB8_120125_csm-2.jpg|Keith Williams prepares [[DEWBOT VII]] for weld repair
 +
Image:DB8_120125_csm-3.jpg|Lucy levels the mill table
 +
Image:DB8_120125_csm-4.jpg|Broaching a keyway in a pully using the Arbor Press
 +
Image:DB8_120125_csm-5.jpg|
 +
Image:DB8_120125_csm-6.jpg|Molly & Sasha broach keyways
 +
Image:DB8_120125_csm-7.jpg|Ian on the mill
 +
Image:DB8_120125_csm-8.jpg|pivot drive sprockets
 +
Image:DB8_120125_csm-9.jpg|Patrick C
 +
</gallery>
  
 
==Thursday January 26, 2012==
 
==Thursday January 26, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120119_csm-1.jpg|
+
Image:DB8_120126_csm-1.jpg|Douglas assembling pivot wheels
 +
Image:DB8_120126_csm-2.jpg|Yash, Manas & Mike Rizzo changing a lift pulley in the prototype
 +
Image:DB8_120126_csm-3.jpg|Preparing for a lift/shooter test
 +
Image:DB8_120126_csm-4.jpg|Lift/shooter test
 +
Image:DB8_120126_csm-5.jpg|fall of shot
 +
Image:DB8_120126_csm-6.jpg|
 +
Image:DB8_120126_csm-7.jpg|Pivot wheels
 +
Image:DB8_120126_csm-8.jpg|Mike Rizzo setting up the prototype at the alliance station...
 +
Image:DB8_120126_csm-9.jpg|...and we hit beyond the key
 +
</gallery>
 +
 
 +
==Friday January 27, 2012==
 +
<gallery widths=250 heights=250 perrow=3>
 +
Image:DB8_120127_csm-2.jpg|Molly at CNC Mill
 +
Image:DB8_120127_csm-5.jpg|Molly & Kira
 +
Image:DB8_120127_csm-7.jpg|bored pulley
 
</gallery>
 
</gallery>
  
 
==Saturday January 28, 2012==
 
==Saturday January 28, 2012==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB8_120128_csm-1.jpg|  
+
Image:DB8_120128_csm-1.jpg|Pivot side in mill for drilling and tapping edge holes
 +
Image:DB8_120128_csm-2.jpg|Design review
 +
Image:DB8_120128_csm-3.jpg|Yash & Manas cut frame pieces with Gary Deaver
 +
Image:DB8_120128_csm-4.jpg|Day's plan (Pivot Party put off)
 +
Image:DB8_120128_csm-5.jpg|Jake working on tachometer mount with Patrick C
 +
Image:DB8_120128_csm-6.jpg|DJ
 +
Image:DB8_120128_csm-7.jpg|Mike M
 +
Image:DB8_120128_csm-8.jpg|[[DEWBOT VII]] ''deux'' with light & camera
 +
Image:DB8_120128_csm-9.jpg|Yash cutting clearance holes in frame pieces
 +
Image:DB8_120128_csm-10.jpg|Manas and Patrick C assember shooter test control board
 +
Image:DB8_120128_csm-11.jpg|Shooter test system
 +
Image:DB8_120128_csm-12.jpg|Shooter test from key
 +
Image:DB8_120128_csm-13.jpg|Pivot sides and drawing
 +
Image:DB8_120128_csm-15.jpg|Pivot module tops with bearings
 +
Image:DB8_120128_csm-16.jpg|Pivot module bottoms with bearings
 +
Image:DB8_120128_csm-17.jpg|Gary Deaver aligns a bearing...
 +
Image:DB8_120128_csm-18.jpg|...and Tommy drives it home
 +
Image:DB8_120129_skm.jpg|DEWBOT VIII design (so far)
 
</gallery>
 
</gallery>
 
----
 
----
 
[[Category:Robot]][[Category:DEWBOT VIII]][[Category:DEWBOT VIII Build]][[Category:Photo Galleries]]
 
[[Category:Robot]][[Category:DEWBOT VIII]][[Category:DEWBOT VIII Build]][[Category:Photo Galleries]]

Latest revision as of 14:13, 30 January 2012

Sunday January 22, 2012

  • Pivot sides & top in mill (milled from (1) piece of aluminum

  • Pivot braces

  • Molly cleaning out milled metal

  • Lucy & Kira

  • Lucy & Kira

  • Pivot braces

  • Pivot braces

  • Milled pivot parts

  • Pivot tops

  • Pivot side (shiney!)

  • Pivot sides

  • Pivot tops

  • Lift debate

  • Patrick C, Yahya & Gary Deaver lubricate steering motor gearboxes

  • A steering motor gearbox getting lubrucated

  • Kira, Lucy & Julie Kulik

  • Patrick C

  • Bridge deployer

Monday January 23, 2012

  • Keith Williams observes as Kira and Nicole remove DEWBOT VII's right rear pivot

  • Rich Kulik

  • Douglas with wheel tread

  • Yahya punching mounting holes

  • Wheel

  • Kira cutting ½" 7075 Al rod for pivot transfer axles

  • Yash grinding

  • Yash, Douglas & Keith Williams

  • Sasha & Molly bending conduit...

  • ...a little further yet...

  • ...done!

  • Pivot wheel

  • Douglas & Keith Williams

  • Lift prototype...

  • ...number 218

Tuesday January 24, 2012

  • Yahya with Gary Deaver

  • Boring timing pulleys

  • Faith McKown up ladder

  • Welding crew - Yash, Douglas, Keith Williams & Manas

  • Sasha & Ben Kellom

  • Molly & Sasha - modifying lift prototype

  • Ben Kellon, Sasha & Molly

  • Yahya on lathe

  • Lift / shooter prototype test (successful)

Wednesday January 25, 2012

  • Molly deburs pivot module bottom plates

  • Keith Williams prepares DEWBOT VII for weld repair

  • Lucy levels the mill table

  • Broaching a keyway in a pully using the Arbor Press

  • DB8 120125 csm-5.jpg

  • Molly & Sasha broach keyways

  • Ian on the mill

  • pivot drive sprockets

  • Patrick C

Thursday January 26, 2012

  • Douglas assembling pivot wheels

  • Yash, Manas & Mike Rizzo changing a lift pulley in the prototype

  • Preparing for a lift/shooter test

  • Lift/shooter test

  • fall of shot

  • DB8 120126 csm-6.jpg

  • Pivot wheels

  • Mike Rizzo setting up the prototype at the alliance station...

  • ...and we hit beyond the key

Friday January 27, 2012

  • Molly at CNC Mill

  • Molly & Kira

  • bored pulley

Saturday January 28, 2012

  • Pivot side in mill for drilling and tapping edge holes

  • Design review

  • Yash & Manas cut frame pieces with Gary Deaver

  • Day's plan (Pivot Party put off)

  • Jake working on tachometer mount with Patrick C

  • DJ

  • Mike M

  • DEWBOT VII deux with light & camera

  • Yash cutting clearance holes in frame pieces

  • Manas and Patrick C assember shooter test control board

  • Shooter test system

  • Shooter test from key

  • Pivot sides and drawing

  • Pivot module tops with bearings

  • Pivot module bottoms with bearings

  • Gary Deaver aligns a bearing...

  • ...and Tommy drives it home

  • DEWBOT VIII design (so far)

Retrieved from "https://team1640.com/wiki/index.php?title=DEWBOT_VIII_Week_Three_Build_Season_Photo_Gallery&oldid=13154"