Difference between revisions of "DEWBOT VII Week Four Build Season Photo Gallery"

From DEW Robotics
Jump to: navigation, search
(Created page with '==Sunday January 30, 2011== <gallery widths=250 heights=250 perrow=3> Image:DB7__110130_csm.jpg| </gallery> ==Monday January 31, 2011== <gallery widths=250 heights=250 perrow=3>...')
 
(→‎Wednesday February 2, 2011)
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
==Sunday January 30, 2011==
 
==Sunday January 30, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110130_csm.jpg|
+
Image:DB7_Molly_110130_csm.jpg|Molly milling rough gussets
 +
Image:DB7_rough_gussets_110130_csm.jpg|rough gussets in mill
 +
Image:DB7_DJ_BenR_110130_csm.jpg|DJ & Ben R prepare the video demo
 +
Image:DB7_live_video_110130_csm.jpg|Ben R showing great live video from the robot camera
 +
Image:DB7_retroreflective_110130_csm.jpg|Look at the retroreflective target!
 +
Image:DB7_programming_team_110130_csm.jpg|Programming team, DJ, Ben R, Corey, Juliet Christopher
 +
Image:DB7_Rizzo_preheat_110130_csm.jpg|Mike Rizzo preheating weld area
 +
Image:DB7_Maley_welding_110130_csm_1.jpg|Siri Maley & Mike Rizzo welding frame
 +
Image:DB7_Maley_welding_110130_csm_2.jpg
 +
Image:DB7_Kulick_110130_csm.jpg|Rich Kulik with minibot pc wheel
 +
Image:DB7_Alex_110130_csm.jpg|Alex completing the gussets
 +
Image:DB7_minibot_work_110130_csm.jpg|Dave Moyer, Douglas, Andrew & Juan Posada working on minibots
 +
Image:DB7_faster_minibot_110130_csm.jpg|A faster, lighter minibot
 +
Image:DB7_not_rough_gussets_110130_csm.jpg|Gusssets; no longer rough
 +
Image:DB7_pivot_module_110130_csm.jpg|The first pivot module assembled
 +
Image:DB7_frame_weld_test_110130_csm.jpg|Mike Rizzo & Clem McKown test the frame's weld strength (before adding gussets)
 +
Image:DB7_gussets_110130_csm.jpg|Frame back on form reversed, with gussets in place for welding
 +
Image:DB7_gusset_110130_csm.jpg|detail of gusset on welding template
 
</gallery>
 
</gallery>
  
 
==Monday January 31, 2011==
 
==Monday January 31, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110131_csm.jpg|
+
Image:DB7_minibot_110131_csm_1.jpg|Minibot on pole (at rest)
 +
Image:DB7_minibot_110131_csm_2.jpg|Minibot clmbing
 +
Image:DB7_Jack_Deaver_110131_csm.jpg|Jack assembling pivots with Gary Deaver
 +
Image:DB7_pivots_110131_csm.jpg|Pivots in assembly
 +
Image:DB7_Deaver_110131_csm.jpg|Gary Deaver examining pivot
 +
Image:DB7_Douglas_110131_csm.jpg|Douglas rigging switch
 
</gallery>
 
</gallery>
  
 
==Tuesday February 1, 2011==
 
==Tuesday February 1, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110201_csm.jpg|
+
Image:DB7_DJ_Kulick_McKown_110201_csm.jpg|DJ, Rich Kulik & Clem McKown
 +
Image:DB7_broken_welder_110201_csm.jpg|Broken MIG welding gun
 +
Image:DB7_Deaver_Douglas_BenB_110201_csm.jpg|Gary Deaver, Douglas & Ben B assembling pivots
 +
Image:DB7_Moyer_Deaver_110201_csm.jpg|David Moyer & Gary Deaver attempting to drive a pulley onto a pivot tube
 +
Image:DB7_Douglas_Deaver110201_csm.jpg|Douglas & Gary Deaver with pivot
 +
Image:DB7_pivot_modules_110201_csm.jpg|Four incomplete pivot modules
 
</gallery>
 
</gallery>
  
 
==Wednesday February 2, 2011==
 
==Wednesday February 2, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110202_csm.jpg|
+
Image:DB7_Posada_Yahya_Drew_Garrison_110202_csm.jpg|Juan Posada with Yahya, Drew & Garrison
 +
Image:DB7_Garrison_Nichole_Deaver_110202_csm.jpg|Garrison, Nicole & Gary Deaver assembling pivot modules
 +
Image:DB7_Douglas_Moyer_110202_csm.jpg|Douglas & David Moyer with the scissor minobot
 +
Image:DB7_pivot_assembly_110202_csm.jpg|Pivot module assembly team
 +
Image:DB7_pivot_module_110202_csm.jpg|A pivot module
 +
Image:DB7_chassis_frame_110202_csm.jpg|Chassis frame - not all welded yet
 +
</gallery>
 +
 
 +
==Thursday February 3, 2011==
 +
<gallery widths=250 heights=250 perrow=3>
 +
Image:DB7_welding_setup_110203_csm.jpg|Chassis frame welding setup
 +
Image:DB7_McKown_Matt_welding_110203_csm_1.jpg|Clem McKown mentoring Matt welding
 +
Image:DB7_McKown_Matt_welding_110203_csm_2.jpg|Clem McKown & Matt welding
 +
Image:DB7_Kellom_110203_csm.jpg|Ben Kellom
 +
Image:DB7_Molly_Sasha_CAD_110203_csm.jpg|Molly & Sasha working together in Inventor to design the minibot size box
 +
Image:DB7_programming_team_110203_csm.jpg|The programming team - ''You could hear a pin drop!''
 +
Image:DB7_BenR_110203_csm.jpg|Ben R - Senior Programmer
 +
Image:DB7_MichaelM_110203_csm.jpg|Michael M - Programmer
 +
Image:DB7_Christopher_110203_csm.jpg|Juliet Christopher - Head Programming Mentor
 +
Image:DB7_Matt_Rizzo_welding_110203_csm_1.jpg|Matt welding while Mike Rizzo mentors
 +
Image:DB7_pc_wheel_110203_csm_1.jpg|How to make a polycarbonate wheel - 1/8
 +
Image:DB7_pc_wheel_110203_csm_2.jpg|How to make a polycarbonate wheel - 2/8
 +
Image:DB7_pc_wheel_110203_csm_3.jpg|How to make a polycarbonate wheel - 3/8
 +
Image:DB7_pc_wheel_110203_csm_4.jpg|How to make a polycarbonate wheel - 4/8
 +
Image:DB7_Douglas_lathe_110203_csm_1.jpg|Douglas turning wheel - 5/8
 +
Image:DB7_Douglas_lathe_110203_csm_2.jpg|Douglas turning wheel - 6/8
 +
Image:DB7_Douglas_lathe_110203_csm_3.jpg|Douglas turning wheel - 7/8
 +
Image:DB7_Douglas_lathe_110203_csm_4.jpg|Douglas turning wheel - 8/8
 +
Image:DB7_Matt_Rizzo_frame2_110203_csm.jpg|Matt & Mike Rizzo with chassis frame deux
 +
Image:DB7_frame1_back_110203_csm.jpg|chassis frame prime back on welding template
 +
Image:DB7_frame1_110203_csm.jpg|Frame deux
 +
Image:DB7_Matt_Rizzo_welding_110203_csm_1.jpg|Matt welding with Mike Rizzo
 +
Image:DB7_chassis_side_110203_csm.jpg|Chassis side set up to weld
 +
Image:DB7_Matt_welding110203_csm.jpg|Matt welding
 
</gallery>
 
</gallery>
  
 
==Friday February 4, 2011==
 
==Friday February 4, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
image:DB7__110204_csm.jpg|
+
image:DB7_Jack_pivot_braces_110204_csm.jpg|Jack adding pivot braces to the pivots
 +
image:DB7_pivot_module_top_rib_110204_csm.jpg|Stiffening ribs installed on the pivot module top plates
 +
image:DB7_Rizzo_Matt_cleaning_110204_csm.jpg|Mike Rizzo & Matt cleaning Al surfaces in welding areas
 +
image:DB7_programming_team_110204_csm-4.jpg|Programming team coming out onto the field to play - Ben R, Juliet Christopher & Corey
 +
image:DB7_BenR_DJ_110204_csm.jpg|Ben R & DJ
 +
image:DB7_Matt_welding_110204_csm_1.jpg|Matt welding - ''up close & personal''
 +
image:DB7_align_deploy_ideas_110204_csm.jpg|Concepts for aligning & deploying the Minibot
 +
image:DB7_McKown_Matt_setup_110204_csm.jpg|Clem McKown & Matt setting up frame prime for welding
 +
image:DB7_Matt_welding_110204_csm_2.jpg|Matt welding frame prime together
 
</gallery>
 
</gallery>
  
 
==Saturday February 5, 2011==
 
==Saturday February 5, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110205_csm.jpg|
+
Image:DB7_BenR_110205_csm.jpg|Ben R
−
 
+
Image:DB7_Christopher_110205_csm.jpg|Julie Christopher
 +
Image:DB7_Maley_110205_csm.jpg|A very tired Siri Maley
 +
Image:DB7_pivot_module_assembly_110205_csm.jpg|Jack, Michael B & Matt assembling pivot modules
 +
Image:DB7_Matt_frames_110205_csm.jpg|Matt with finished frames
 +
Image:DB7_Selina_110205_csm.jpg|Selina
 +
Image:DB7_pivot_module_110205_csm.jpg|Pivot module on the scale
 +
Image:DB7_pivot_module_mass_110205_csm.jpg|Pivot module weigh-in
 +
Image:DB7_frame_prime_110205_csm.jpg|Frame ''prime'' on scale
 +
Image:DB7_frame_mass_110205_csm.jpg|Frame ''prime'' weigh-in
 +
Image:DB7_Matt_grinding_110205_csm.jpg|Matt grinding frame
 +
Image:DB7_Faith_Selina_110205_csm.jpg|Faith & Selina cutting electronics panel
 +
Image:DB7_Rizzo_pivot_module_110205_csm.jpg|Rizzo completing a pivot module
 +
Image:DB7_Molly_bolting_pivots_110205_csm_1.jpg|Molly bolting pivot modules to chassis frame
 +
Image:DB7_MichaelM_Corey_110205_csm.jpg|Michael M & Corey
 +
Image:DB7_Christopher_BenR_110205_csm.jpg|Julie Christopher & Ben R testing software on the field
 +
Image:DB7_Molly_bolting_pivots_110205_csm_2.jpg|Molly installing modules
 +
Image:DB7_Rizzo_drive-trains_110205_csm.jpg|Mike Rizzo with drive-trains ''prime'' & ''deux''
 +
Image:DB7_chassis_110205_csm.jpg|Robot chassis
 +
Image:DB7_2-by-2_110205_csm.jpg|''2-by-2, hands of blue''
 +
Image:DB7_filling_pultrusion_110205_csm.jpg|Filling pultrusion end with carbon fiber & epoxy
 
</gallery>
 
</gallery>
 
----
 
----
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]

Latest revision as of 23:32, 3 April 2011

Sunday January 30, 2011

  • Molly milling rough gussets

  • rough gussets in mill

  • DJ & Ben R prepare the video demo

  • Ben R showing great live video from the robot camera

  • Look at the retroreflective target!

  • Programming team, DJ, Ben R, Corey, Juliet Christopher

  • Mike Rizzo preheating weld area

  • Siri Maley & Mike Rizzo welding frame

  • DB7 Maley welding 110130 csm 2.jpg

  • Rich Kulik with minibot pc wheel

  • Alex completing the gussets

  • Dave Moyer, Douglas, Andrew & Juan Posada working on minibots

  • A faster, lighter minibot

  • Gusssets; no longer rough

  • The first pivot module assembled

  • Mike Rizzo & Clem McKown test the frame's weld strength (before adding gussets)

  • Frame back on form reversed, with gussets in place for welding

  • detail of gusset on welding template

Monday January 31, 2011

  • Minibot on pole (at rest)

  • Minibot clmbing

  • Jack assembling pivots with Gary Deaver

  • Pivots in assembly

  • Gary Deaver examining pivot

  • Douglas rigging switch

Tuesday February 1, 2011

  • DJ, Rich Kulik & Clem McKown

  • Broken MIG welding gun

  • Gary Deaver, Douglas & Ben B assembling pivots

  • David Moyer & Gary Deaver attempting to drive a pulley onto a pivot tube

  • Douglas & Gary Deaver with pivot

  • Four incomplete pivot modules

Wednesday February 2, 2011

  • Juan Posada with Yahya, Drew & Garrison

  • Garrison, Nicole & Gary Deaver assembling pivot modules

  • Douglas & David Moyer with the scissor minobot

  • Pivot module assembly team

  • A pivot module

  • Chassis frame - not all welded yet

Thursday February 3, 2011

  • Chassis frame welding setup

  • Clem McKown mentoring Matt welding

  • Clem McKown & Matt welding

  • Ben Kellom

  • Molly & Sasha working together in Inventor to design the minibot size box

  • The programming team - You could hear a pin drop!

  • Ben R - Senior Programmer

  • Michael M - Programmer

  • Juliet Christopher - Head Programming Mentor

  • Matt welding while Mike Rizzo mentors

  • How to make a polycarbonate wheel - 1/8

  • How to make a polycarbonate wheel - 2/8

  • How to make a polycarbonate wheel - 3/8

  • How to make a polycarbonate wheel - 4/8

  • Douglas turning wheel - 5/8

  • Douglas turning wheel - 6/8

  • Douglas turning wheel - 7/8

  • Douglas turning wheel - 8/8

  • Matt & Mike Rizzo with chassis frame deux

  • chassis frame prime back on welding template

  • Frame deux

  • Matt welding with Mike Rizzo

  • Chassis side set up to weld

  • Matt welding

Friday February 4, 2011

  • Jack adding pivot braces to the pivots

  • Stiffening ribs installed on the pivot module top plates

  • Mike Rizzo & Matt cleaning Al surfaces in welding areas

  • Programming team coming out onto the field to play - Ben R, Juliet Christopher & Corey

  • Ben R & DJ

  • Matt welding - up close & personal

  • Concepts for aligning & deploying the Minibot

  • Clem McKown & Matt setting up frame prime for welding

  • Matt welding frame prime together

Saturday February 5, 2011

  • Ben R

  • Julie Christopher

  • A very tired Siri Maley

  • Jack, Michael B & Matt assembling pivot modules

  • Matt with finished frames

  • Selina

  • Pivot module on the scale

  • Pivot module weigh-in

  • Frame prime on scale

  • Frame prime weigh-in

  • Matt grinding frame

  • Faith & Selina cutting electronics panel

  • Rizzo completing a pivot module

  • Molly bolting pivot modules to chassis frame

  • Michael M & Corey

  • Julie Christopher & Ben R testing software on the field

  • Molly installing modules

  • Mike Rizzo with drive-trains prime & deux

  • Robot chassis

  • 2-by-2, hands of blue

  • Filling pultrusion end with carbon fiber & epoxy

Retrieved from "https://team1640.com/wiki/index.php?title=DEWBOT_VII_Week_Four_Build_Season_Photo_Gallery&oldid=11121"