Difference between revisions of "DEWBOT VII Week Six Build Season Photo Gallery"

From DEW Robotics
Jump to: navigation, search
(→‎Sunday February 13, 2011)
 
(20 intermediate revisions by 4 users not shown)
Line 2: Line 2:
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
 
Image:DB7_Molly_Sasha_outreach_110213_csm.jpg|Molly and Sasha bend plastic sheet to the amazement and entertainment of visiting students
 
Image:DB7_Molly_Sasha_outreach_110213_csm.jpg|Molly and Sasha bend plastic sheet to the amazement and entertainment of visiting students
−
Image:DB7_deux_driving_110213_csm_1.jpg|''Deux'' driving...
+
Image:DB7_deux_driving_110213_csm_3.jpg|''Deux'' driving (very well)
−
Image:DB7_deux_driving_110213_csm_2.jpg|...very...
 
−
Image:DB7_deux_driving_110213_csm_3.jpg|...well
 
 
Image:DB7_compressor_mounted_110213_csm.jpg|Compressor mounted
 
Image:DB7_compressor_mounted_110213_csm.jpg|Compressor mounted
 
Image:DB7_arm_motor_110213_csm.jpg|Arm motor
 
Image:DB7_arm_motor_110213_csm.jpg|Arm motor
 
Image:DB7_DJs_birthday_110213_csm.jpg|DJ's Birthday celebration
 
Image:DB7_DJs_birthday_110213_csm.jpg|DJ's Birthday celebration
 
Image:DB7_claw_bar_aka_triangle_110213_csm.jpg|Composite (plywood, carbon fiber & e-glass) claw bar (a.k.a. triangle)
 
Image:DB7_claw_bar_aka_triangle_110213_csm.jpg|Composite (plywood, carbon fiber & e-glass) claw bar (a.k.a. triangle)
−
Image:DB7_prime_mass_110213_csm.jpg|''Prime's'' mass - icluding compressor, clippard, solenoids & Claw w/ Claw cylinders (and a 0.4 lb<sub>m</sub> screwdriver
+
Image:DB7_prime_mass_110213_csm.jpg|''Prime's'' mass - including compressor, clippard, solenoids & Claw w/ Claw cylinders (and a 0.4 lb<sub>m</sub> screwdriver
−
Image:DB7_minibot_mass_110213_csm.jpg|Minibot mass
 
 
Image:DB7_Maley_claw_110213_csm.jpg|Siri Maley installing the Claw
 
Image:DB7_Maley_claw_110213_csm.jpg|Siri Maley installing the Claw
−
Image:DB7_Kulick_Maley_Rizzo_Deaver_110213_csm_1.jpg|Rich Kulick, Siri Maley, Mike Rizzo & Gary Deaver...
+
Image:DB7_Kulick_Maley_Rizzo_Deaver_110213_csm_1.jpg|Rich Kulik, Siri Maley, Mike Rizzo & Gary Deaver - claw development
−
Image:DB7_Kulick_Maley_Rizzo_Deaver_110213_csm_2.jpg|...Claw development
 
−
Image:DB7_mentor_meeting_110213_csm.jpg|An unsceduled 11 PM mentor meeting
 
−
Image:DB7_claw_110213_csm.jpg|Claw
 
 
</gallery>
 
</gallery>
  
 
==Monday February 14, 2011==
 
==Monday February 14, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110214_csm.jpg|
+
Image:DB7_Molly_wheel_110214_csm_1.jpg|Molly Wheel on pole
 +
Image:DB7_Molly_wheel_110214_csm_2.jpg|Molly Wheel being assembled
 +
Image:DB7_shorter_belt_110214_csm.jpg|The 2000mm arm drive belt is replaced with a 500mm belt to reduce arm bounce
 +
Image:DB7_Faith_Ian_110214_csm.jpg|Faith & Ian (& Garrison) tape the field in preparation for practice
 +
Image:DB7_Jack_110214_csm.jpg|Jack working with Gary Deaver on arm
 +
Image:DB7_Molly_110214_csm.jpg|Molly & Julie Kulik work on ''V-bot''
 +
Image:DB7_V-bot_110214_csm_1.jpg|''V-bot'' at rest
 +
Image:DB7_V-bot_110214_csm_2.jpg|''V-bot'' climbimg...
 +
Image:DB7_V-bot_110214_csm_3.jpg|...past Ben Kellon and to the switch
 
</gallery>
 
</gallery>
  
 
==Tuesday February 15, 2011==
 
==Tuesday February 15, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110215_csm.jpg|
+
Image:DB7_sensor_fl_110215_csm.jpg|Long-range IR sensor - front left
 +
Image:DB7_sensor_lf_110215_csm.jpg|Short-range IR sensor - left front
 +
Image:DB7_Deaver_BenB_110215_csm.jpg|Gary Deaver & Ben B working on claw development
 +
Image:DB7_Christopher_Faith_110215_csm.jpg|Julie Christopher & Faith McKown taping field
 +
Image:DB7_MichaelM_BenR_DJ_110215_csm.jpg|Programming Team - Michael M, Ben R & DJ
 +
Image:DB7_Bachmann_Deaver_Featherman_110215_csm.jpg|Julie Kulik, Gary Deaver & Scott Featherman working on ''deux''
 +
Image:DB7_sensor_mts_110215_csm.jpg|Arm Angle Sensor Mounts on mill
 +
Image:DB7_sensor lr_110215_csm.jpg|Short-range IR sensor - left rear
 +
Image:DB7_Featherman_Bachmann_110215_csm.jpg|Scott Featherman & Julie Kulik wiring ''(Optimus) prime''
 
</gallery>
 
</gallery>
  
 
==Wednesday February 16, 2011==
 
==Wednesday February 16, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110216_csm.jpg|
+
Image:DB7_taping_110216_csm.jpg|Faith & Jack taping the field (with assistant)
 +
Image:DB7_threading_rod_110216_csm_1.jpg|Threading 3/8" steel rod on the lathe...
 +
Image:DB7_threading_rod_110216_csm_2.jpg|...into the die...
 +
Image:DB7_threading_rod_110216_csm_3.jpg|...and ''viola'', a threaded rod end.
 +
Image:DB7_calibrating_pivots_110216_csm.jpg|Calibrating pivots on ''prime''
 +
Image:DB7_short_belt_deux_110216_csm.jpg|''Deux'' gets a short (500mm) arm drive belt too
 +
Image:DB7_claw_110216_csm_1.jpg|Claw in position for ground pick-up
 +
Image:DB7_start_position_110216_csm.jpg|Arm in starting position
 +
Image:DB7_belt_guard_detail_110216_csm.jpg|Garrison, Sasha, Molly & Andrew make belt guards
 +
Image:DB7_bumper_detail_110216_csm.jpg|Ben B, Mike Rizzo & Yahya cut pool noodles for bumpers
 +
Image:DB7_claw_110216_csm_2.jpg|Claw extended
 +
Image:DB7_prime_110216_csm.jpg|''Prime'' on field
 +
Image:DB7_Deaver_Weissman_110216_csm.jpg|Gary Deaver & John Weissman
 +
Image:DB7_belt_guard_110216_csm.jpg|Pivot belt guard
 +
Image:DB7_robots_110216_csm.jpg|''(Optimus) Prime'' & ''deux''
 
</gallery>
 
</gallery>
  
 
==Thursday February 17, 2011==
 
==Thursday February 17, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110217_csm_1.jpg|
+
Image:DB7_Deaver_Featherman_110217_csm.jpg|Gary Deaver & Scott Featherman working on ''deux''
 +
Image:DB7_MichaelM_Christopher_110217_csm.jpg|Michael M & Julie Christopher calibrating the IR sensors
 +
Image:DB7_Featherman_assist_110217_csm.jpg|Scott Featherman & wiring assistant
 +
Image:DB7_Alex_110217_csm.jpg|Alex on the mill
 +
Image:DB7_bumper_crew_110217_csm.jpg|Andrew, Mike Rizzo & Gary Deaver building bumpers
 +
Image:DB7_FRC_field_110217_csm.jpg|''Hey, this kinda' looks like an FRC field!''
 +
Image:DB7_prime_110217_csm.jpg|''Prime'' driving
 +
Image:DB7_MichaelM_110217_csm.jpg|Michael M setting up the robot for autonomous
 +
Image:DB7_Sasha_Andrew_110217_csm.jpg|Sasha & Andrew working on minibot deployment assembly
 
</gallery>
 
</gallery>
  
 
==Friday February 18, 2011==
 
==Friday February 18, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
image:DB7__110218_csm.jpg|
+
image:DB7_Maley_110218_csm.jpg|Siri Maley shifting PDU back on ''deux'' to make room for photosensors
 +
image:DB7_Carly_Maley_110218_csm.jpg|Carly & Siri Maley work through deployment tactics
 +
image:DB7_Selina_Carly_110218_csm.jpg|Selina & Carly drilling mounting holes for photosensors
 +
image:DB7_Corey_Rizzo_110218_csm.jpg|Corey & Mike Rizzo building bumpers
 +
image:DB7_Matt_110218_csm.jpg|Matt on mill for regulator mounts
 +
image:DB7_Molly_110218_csm.jpg|Molly installing belt guards
 +
image:DB7_Molly_Maley_110218_csm.jpg|Molly & Siri Maley
 +
image:DB7_Nichole_Featherman_110218_csm.jpg|Nicole & Scott Featherman wiring pneumatics
 +
image:DB7_V-bot_110218_csm.jpg|V-bot climbing pole
 +
image:DB7_line_following_110218_csm.jpg|(sometimes) line following
 +
image:DB7_bumper_painters_110218_csm.jpg|Bumper painting crew
 +
image:DB7_Sasha_Andrew_110218_csm.jpg|Sasha & Andrew painting bumpers
 +
image:DB7_Sellina_Douglas_110218_csm.jpg|Selina & Douglas on drill press
 +
image:DB7_Maley_Deaver_BenR_110218_csm.jpg|Siri Maley, Gary Deaver & Ben R preparing for first claw test
 +
image:DB7_claw_110218_csm.jpg|First claw test.
 
</gallery>
 
</gallery>
  
 
==Saturday February 19, 2011==
 
==Saturday February 19, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110219_csm.jpg|
+
image:DB7_Maley_110219_csm.jpg|Siri Maley working on claw
 +
image:DB7_deux_work_crew_110219_csm.jpg|
 +
image:DB7_keyway_110219_csm.jpg|Keyway cut in pulley
 +
image:DB7_keyway_cutter_110219_csm.jpg|Keyway cutter & shaft
 +
image:DB7_Rizzo_Andrew_bumpers_110219_csm.jpg|Mike Rizzo & Andrew making bumpers
 +
image:DB7_prime_110219_csm.jpg|''Prime''
 +
image:DB7_Maley_Featherman_110219_csm.jpg|Siri Maley & Scott Featherman, Jalil watching
 +
image:DB7_pivot_110219_csm.jpg|Pivot
 +
image:DB7_hung_ut_110219_csm.jpg|Hung Ubertube
 +
image:DB7_arm_work_110219_csm.jpg|Siri Maley, Ben Kellom & Gary Deaver work on arm
 +
image:DB7_another_ut_110219_csm.jpg|Another Ubertube hung
 +
image:DB7_hanging_triangle_110219_csm.jpg|Hanging a triangle
 +
image:DB7_driver_view_110219_csm.jpg|Driver view
 +
image:DB7_Sasha_Andrew_110219_csm.jpg|Sasha & Andrew preparing to drill
 +
image:DB7_DJ_BenR_Christopher_110219_csm.jpg|DJ, Ben R & Juliet Christopher
 
</gallery>
 
</gallery>
  
 
----
 
----
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]

Latest revision as of 23:39, 4 April 2011

Sunday February 13, 2011

  • Molly and Sasha bend plastic sheet to the amazement and entertainment of visiting students

  • Deux driving (very well)

  • Compressor mounted

  • Arm motor

  • DJ's Birthday celebration

  • Composite (plywood, carbon fiber & e-glass) claw bar (a.k.a. triangle)

  • Prime's mass - including compressor, clippard, solenoids & Claw w/ Claw cylinders (and a 0.4 lbm screwdriver

  • Siri Maley installing the Claw

  • Rich Kulik, Siri Maley, Mike Rizzo & Gary Deaver - claw development

Monday February 14, 2011

  • Molly Wheel on pole

  • Molly Wheel being assembled

  • The 2000mm arm drive belt is replaced with a 500mm belt to reduce arm bounce

  • Faith & Ian (& Garrison) tape the field in preparation for practice

  • Jack working with Gary Deaver on arm

  • Molly & Julie Kulik work on V-bot

  • V-bot at rest

  • V-bot climbimg...

  • ...past Ben Kellon and to the switch

Tuesday February 15, 2011

  • Long-range IR sensor - front left

  • Short-range IR sensor - left front

  • Gary Deaver & Ben B working on claw development

  • Julie Christopher & Faith McKown taping field

  • Programming Team - Michael M, Ben R & DJ

  • Julie Kulik, Gary Deaver & Scott Featherman working on deux

  • Arm Angle Sensor Mounts on mill

  • Short-range IR sensor - left rear

  • Scott Featherman & Julie Kulik wiring (Optimus) prime

Wednesday February 16, 2011

  • Faith & Jack taping the field (with assistant)

  • Threading 3/8" steel rod on the lathe...

  • ...into the die...

  • ...and viola, a threaded rod end.

  • Calibrating pivots on prime

  • Deux gets a short (500mm) arm drive belt too

  • Claw in position for ground pick-up

  • Arm in starting position

  • Garrison, Sasha, Molly & Andrew make belt guards

  • Ben B, Mike Rizzo & Yahya cut pool noodles for bumpers

  • Claw extended

  • Prime on field

  • Gary Deaver & John Weissman

  • Pivot belt guard

  • (Optimus) Prime & deux

Thursday February 17, 2011

  • Gary Deaver & Scott Featherman working on deux

  • Michael M & Julie Christopher calibrating the IR sensors

  • Scott Featherman & wiring assistant

  • Alex on the mill

  • Andrew, Mike Rizzo & Gary Deaver building bumpers

  • Hey, this kinda' looks like an FRC field!

  • Prime driving

  • Michael M setting up the robot for autonomous

  • Sasha & Andrew working on minibot deployment assembly

Friday February 18, 2011

  • Siri Maley shifting PDU back on deux to make room for photosensors

  • Carly & Siri Maley work through deployment tactics

  • Selina & Carly drilling mounting holes for photosensors

  • Corey & Mike Rizzo building bumpers

  • Matt on mill for regulator mounts

  • Molly installing belt guards

  • Molly & Siri Maley

  • Nicole & Scott Featherman wiring pneumatics

  • V-bot climbing pole

  • (sometimes) line following

  • Bumper painting crew

  • Sasha & Andrew painting bumpers

  • Selina & Douglas on drill press

  • Siri Maley, Gary Deaver & Ben R preparing for first claw test

  • First claw test.

Saturday February 19, 2011

  • Siri Maley working on claw

  • DB7 deux work crew 110219 csm.jpg

  • Keyway cut in pulley

  • Keyway cutter & shaft

  • Mike Rizzo & Andrew making bumpers

  • Prime

  • Siri Maley & Scott Featherman, Jalil watching

  • Pivot

  • Hung Ubertube

  • Siri Maley, Ben Kellom & Gary Deaver work on arm

  • Another Ubertube hung

  • Hanging a triangle

  • Driver view

  • Sasha & Andrew preparing to drill

  • DJ, Ben R & Juliet Christopher

Retrieved from "https://team1640.com/wiki/index.php?title=DEWBOT_VII_Week_Six_Build_Season_Photo_Gallery&oldid=11132"