Difference between revisions of "DEWBOT VII Week Two Build Season Photo Gallery"

From DEW Robotics
Jump to: navigation, search
(→‎Monday January 17, 2011)
 
(14 intermediate revisions by 4 users not shown)
Line 2: Line 2:
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
 
Image:DB7_expanding_field_110116_csm.jpg|Expanding the practice field to full length
 
Image:DB7_expanding_field_110116_csm.jpg|Expanding the practice field to full length
−
Image:DB7_Molley_Kulick_arm_CAD_110116_csm-2.jpg|Molley & Rich Kulick work on the 4-bar linkage arm in Inventor
+
Image:DB7_Molley_Kulick_arm_CAD_110116_csm-2.jpg|Molly & Rich Kulik work on the 4-bar linkage arm in Inventor
−
Image:DB7_Matt_Kellom_mill_110116_csm.jpg|Matt & Ben Kellow working on the mill
+
Image:DB7_Matt_Kellom_mill_110116_csm.jpg|Matt & Ben Kellom working on the mill
 
Image:DB7_Matt_mill_110116_csm.jpg|Matt running the mill
 
Image:DB7_Matt_mill_110116_csm.jpg|Matt running the mill
−
Image:DB7_Ben_Deaver_reciprocating_saw_110116_csm.jpg|Ben cuts Al stock with reciprocating saw with Gary Deaver
+
Image:DB7_Ben_Deaver_reciprocating_saw_110116_csm.jpg|Ben with Gary Deaver cuts aluminum stock with the reciprocating saw  
 
Image:DB7_Ben_Deaver_Heather_saw_110116_csm.jpg|Gary Deaver finishes the cut
 
Image:DB7_Ben_Deaver_Heather_saw_110116_csm.jpg|Gary Deaver finishes the cut
 
Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|Matt & Corey
 
Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|Matt & Corey
−
Image:DB7_Matt_Corey_Molley_Garrison_Ben_110116_csm.jpg|Matt, Corey, Molley, Garrison & Ben - the mill attracts attention!
+
Image:DB7_Matt_Corey_Molley_Garrison_Ben_110116_csm.jpg|Matt, Corey, Molly, Garrison & Ben - the mill attracts attention!
 
Image:DB7_programming_team_110116_csm.jpg|Programming team
 
Image:DB7_programming_team_110116_csm.jpg|Programming team
 
Image:DB7_Paul_Klufas_110116_csm.jpg|Paul Klufas programming
 
Image:DB7_Paul_Klufas_110116_csm.jpg|Paul Klufas programming
 
Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|
 
Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|
−
Image:DB7_plaining_work_surface_110116_csm.jpg|Planing an Al work surface
+
Image:DB7_plaining_work_surface_110116_csm.jpg|Planing an aluminum work surface
−
Image:DB7_Heather_bandsaw_110116_csm.jpg|Heather cutting Al stock for pivots on the horizontal bandsaw
+
Image:DB7_Heather_bandsaw_110116_csm.jpg|Heather cutting aluminum stock for pivots on the horizontal bandsaw
−
Image:DB7_bandsaw_110116_csm.jpg|Al stock being cut on the bandsaw
+
Image:DB7_bandsaw_110116_csm.jpg|Aluminum stock being cut on the bandsaw
 
Image:DB7_Alex_Kellom_mill_110116_csm.jpg|Alex & Ben Kellom on the mill
 
Image:DB7_Alex_Kellom_mill_110116_csm.jpg|Alex & Ben Kellom on the mill
 
</gallery>
 
</gallery>
Line 21: Line 21:
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
 
Image:DB7_Ben_110117_csm.jpg|Ben working on scoring grid frame
 
Image:DB7_Ben_110117_csm.jpg|Ben working on scoring grid frame
−
Image:DB7_Kira_Garrison_110117_csm.jpg|Kira & Garrison moving the loading atation
+
Image:DB7_Kira_Garrison_110117_csm.jpg|Kira & Garrison moving the loading station
−
Image:DB7_Molley_arm_110117_csm.jpg|Molley works on the prototype arm
+
Image:DB7_Molley_arm_110117_csm.jpg|Molly works on the prototype arm
−
Image:DB7_Molley_Kulick_110117_csm.jpg|Molley & Rich Kulick with prototype arm
+
Image:DB7_Molley_Kulick_110117_csm.jpg|Molly & Rich Kulik with prototype arm
 
Image:DB7_field_pieces_110117_csm.jpg|Finished field pieces
 
Image:DB7_field_pieces_110117_csm.jpg|Finished field pieces
−
Image:DB7_Molley_Rich_Deaver_110117_csm.jpg|Molley, Rich Kulick & Gary Deaver discuss the arm
+
Image:DB7_Molley_Rich_Deaver_110117_csm.jpg|Molly, Rich Kulik & Gary Deaver discuss the arm
 
Image:DB7_expanding_field_110117_csm.jpg|Kira, Ben, Garrison & Matt ''still'' expanding field to full length
 
Image:DB7_expanding_field_110117_csm.jpg|Kira, Ben, Garrison & Matt ''still'' expanding field to full length
−
Image:DB7_testing_prototype_110117_csm_1.jpg|Gary Deaver, Molley & Rich Kulick testing the arm prototype
+
Image:DB7_testing_prototype_110117_csm_1.jpg|Gary Deaver, Molly & Rich Kulik testing the arm prototype
 
Image:DB7_testing_prototype_110117_csm_2.jpg|''How high do we get?''
 
Image:DB7_testing_prototype_110117_csm_2.jpg|''How high do we get?''
 
Image:DB7_new_prototype_110117_csm.jpg|New prototype
 
Image:DB7_new_prototype_110117_csm.jpg|New prototype
 
Image:DB7_testing_prototype_110117_csm_3.jpg|Testing the new prototype
 
Image:DB7_testing_prototype_110117_csm_3.jpg|Testing the new prototype
−
Image:DB7_testing_prototype_110117_csm_4.jpg|Rich Kulick
+
Image:DB7_testing_prototype_110117_csm_4.jpg|Rich Kulik
 
</gallery>
 
</gallery>
  
 
==Wednesday January 19, 2011==
 
==Wednesday January 19, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110119_csm-1.jpg|
+
Image:DB7_Alex_Kellom_Molley_110119_csm.jpg|Alex, Ben Kellom & Molly at the lathe
 +
Image:DB7_Ben_Yahya_110119_csm.jpg|Ben & Yahya at the lathe
 +
Image:DB7_Alex_drilling_pivot_spacers_110119_csm.jpg|Alex drilling a Pivot spacer
 +
Image:DB7_pivot_spacer_110119_csm.jpg|Pivot spacer on lathe
 +
Image:DB7_Drew_Jack_Selina_110119_csm.jpg|Drew, Jack & Selina moving the old gates
 +
Image:DB7_arm_team_110119_csm.jpg|The Arm Team at work: Andrew, Sasha, Molly & Rich Kulik
 +
Image:DB7_side_plate_110119_csm.jpg|Pivot side plate
 +
Image:DB7_lathe_110119_csm.jpg|Lathe
 +
Image:DB7_new_claw_110119_csm.jpg|Andrew, Sasha & Molly with claw
 
</gallery>
 
</gallery>
  
 
==Thursday January 20, 2011==
 
==Thursday January 20, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110120_csm.jpg|
+
Image:DB7_Bachmann_110120_csm.jpg|Julie Kulik with Tetrix kit
 +
Image:DB7_spacer_110120_csm.jpg|Spacer on lathe
 +
Image:DB7_Carly_Jack_Matt_110120_csm.jpg|Carly, Jack & Matt
 +
Image:DB7_finished_spacers_110120_csm.jpg|Finished spacers
 +
Image:DB7_Kulick_Molley_110120_csm.jpg|Rich Kulik & Molly work on claw
 +
Image:DB7_Carly_Faith_tower_110120_csm_1.jpg|Carly & Faith McKown assemble the bonus tower
 +
Image:DB7_Carly_Faith_tower_110120_csm_2.jpg|''The tower needs to be straight upright''
 +
Image:DB7_Deaver_Selina_110120_csm_1.jpg|Gary Deaver & Selina get ready to broach keyways
 +
Image:DB7_Deaver_Selina_110120_csm_2.jpg|Selina working on a gear
 +
Image:DB7_Deaver_keyways_110120_csm.jpg|Gary Deaver ''takes off the gloves''
 +
Image:DB7_chaingang_110120_csm.jpg|Julie Kulik & Matt - ''the chaingang''
 +
Image:DB7_Matt_breaking chain_110120_csm.jpg|Matt breaking chain
 
</gallery>
 
</gallery>
  
 
==Saturday January 22, 2011==
 
==Saturday January 22, 2011==
 
<gallery widths=250 heights=250 perrow=3>
 
<gallery widths=250 heights=250 perrow=3>
−
Image:DB7__110122_csm.jpg|
+
Image:DB7_claw_test_110122_csm.jpg|Claw test
 +
Image:DB7_Kulick_Maley_claw_110122_csm.jpg|Rich Kulik & Siri Maley refining claw/arm interface
 +
Image:DB7_Alex_mill_110122_csm.jpg|Alex milling stiffening ribs
 +
Image:DB7_pc_wheel_lathe_110122_csm.jpg|Turning a polycarbonate wheel on the lathe
 +
Image:DB7_Jack_Carly_110122_csm.jpg|Jack & Carly drilling minibot wheels
 +
Image:DB7_Moyer_minibot_wheel_110122_csm.jpg|David Moyer with Tetrix wheel
 +
Image:DB7_Maley_Carly_110122_csm.jpg|Siri Maley & Carly
 +
Image:DB7_Posada_MichaelB_110122_csm_1.jpg|Juan Posada and Michael work on Minibot
 +
Image:DB7_Carly_Selina_110122_csm.jpg|Carly & Selina cut chassis pieces
 +
Image:DB7_Ian_Jack_Matt_110122_csm.jpg|Ian, Jack & Matt use the lathe as a press to broach miter gear keyways
 +
Image:DB7_Moyer_Posada_MichaelB_Davis_110122_csm.jpg|David Moyer, Juan Posada, Michael & Jon Davis with the Minibot
 +
Image:DB7_Yahya_Ian_BenB_110122_csm.jpg|Yahya, Ian & Ben B broaching keyways with the lathe
 +
Image:DB7_Posada_MichaelB_110122_csm_2.jpg|Juan Posada with Minibot
 +
Image:DB7_minibot_110122_csm.jpg|Minibot coming together for the first (or ''FIRST''?) time
 +
Image:DB7_scoring_grid_110122_csm.jpg|Scoring grid - one side 
 
</gallery>
 
</gallery>
 
----
 
----
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]
 
[[Category:Robot]][[Category:DEWBOT VII]][[Category:DEWBOT VII Build]][[Category:Photo Galleries]]

Latest revision as of 16:32, 15 February 2011

Sunday January 16, 2011

  • Expanding the practice field to full length

  • Molly & Rich Kulik work on the 4-bar linkage arm in Inventor

  • Matt & Ben Kellom working on the mill

  • Matt running the mill

  • Ben with Gary Deaver cuts aluminum stock with the reciprocating saw

  • Gary Deaver finishes the cut

  • Matt & Corey

  • Matt, Corey, Molly, Garrison & Ben - the mill attracts attention!

  • Programming team

  • Paul Klufas programming

  • DB7 Matt Corey mill 110116 csm 1.jpg

  • Planing an aluminum work surface

  • Heather cutting aluminum stock for pivots on the horizontal bandsaw

  • Aluminum stock being cut on the bandsaw

  • Alex & Ben Kellom on the mill

Monday January 17, 2011

  • Ben working on scoring grid frame

  • Kira & Garrison moving the loading station

  • Molly works on the prototype arm

  • Molly & Rich Kulik with prototype arm

  • Finished field pieces

  • Molly, Rich Kulik & Gary Deaver discuss the arm

  • Kira, Ben, Garrison & Matt still expanding field to full length

  • Gary Deaver, Molly & Rich Kulik testing the arm prototype

  • How high do we get?

  • New prototype

  • Testing the new prototype

  • Rich Kulik

Wednesday January 19, 2011

  • Alex, Ben Kellom & Molly at the lathe

  • Ben & Yahya at the lathe

  • Alex drilling a Pivot spacer

  • Pivot spacer on lathe

  • Drew, Jack & Selina moving the old gates

  • The Arm Team at work: Andrew, Sasha, Molly & Rich Kulik

  • Pivot side plate

  • Lathe

  • Andrew, Sasha & Molly with claw

Thursday January 20, 2011

  • Julie Kulik with Tetrix kit

  • Spacer on lathe

  • Carly, Jack & Matt

  • Finished spacers

  • Rich Kulik & Molly work on claw

  • Carly & Faith McKown assemble the bonus tower

  • The tower needs to be straight upright

  • Gary Deaver & Selina get ready to broach keyways

  • Selina working on a gear

  • Gary Deaver takes off the gloves

  • Julie Kulik & Matt - the chaingang

  • Matt breaking chain

Saturday January 22, 2011

  • Claw test

  • Rich Kulik & Siri Maley refining claw/arm interface

  • Alex milling stiffening ribs

  • Turning a polycarbonate wheel on the lathe

  • Jack & Carly drilling minibot wheels

  • David Moyer with Tetrix wheel

  • Siri Maley & Carly

  • Juan Posada and Michael work on Minibot

  • Carly & Selina cut chassis pieces

  • Ian, Jack & Matt use the lathe as a press to broach miter gear keyways

  • David Moyer, Juan Posada, Michael & Jon Davis with the Minibot

  • Yahya, Ian & Ben B broaching keyways with the lathe

  • Juan Posada with Minibot

  • Minibot coming together for the first (or FIRST?) time

  • Scoring grid - one side

Retrieved from "https://team1640.com/wiki/index.php?title=DEWBOT_VII_Week_Two_Build_Season_Photo_Gallery&oldid=10439"