Difference between revisions of "DEWBOT VII Week Two Build Season Photo Gallery"

Revision as of 04:39, 17 January 2011

Expanding the practice field to full length
DB7 Molley Kulick arm CAD 110116 csm.jpg

Molley & Rich Kulick work on the 4-linkage arm in Inventor
Matt & Ben Kellow working on the mill
Matt running the mill
Ben cuts Al stock with reciprocating saw with Gary Deaver
eaver finishes the cut
Matt & Corey
Matt, Corey, Molley, Garrison & Ben - the mill attracts attention!
Programming team
Paul Klufas programming
Planing an Al work surface
Heather cutting Al stock for pivots on the horizontal bandsaw
Al stock being cut on the bandsaw
Alex & Ben Kellom on the mill

@@ Line 1: / Line 1: @@
 ==Sunday January 16, 2011==
 <gallery widths=250 heights=250 perrow=3>
-Image:DB7__110116_csm.jpg|
+Image:DB7_expanding_field_110116_csm.jpg|Expanding the practice field to full length
+Image:DB7_Molley_Kulick_arm_CAD_110116_csm.jpg|Molley & Rich Kulick work on the 4-linkage arm in Inventor
+Image:DB7_Matt_Kellom_mill_110116_csm.jpg|Matt & Ben Kellow working on the mill
+Image:DB7_Matt_mill_110116_csm.jpg|Matt running the mill
+Image:DB7_Ben_Deaver_reciprocating_saw_110116_csm.jpg|Ben cuts Al stock with reciprocating saw with Gary Deaver
+Image:DB7_Ben_Deaver_Heather_saw_110116_csm.jpg|eaver finishes the cut
+Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|Matt & Corey
+Image:DB7_Matt_Corey_Molley_Garrison_Ben_110116_csm.jpg|Matt, Corey, Molley, Garrison & Ben - the mill attracts attention!
+Image:DB7_programming_team_110116_csm.jpg|Programming team
+Image:DB7_Paul_Klufas_110116_csm.jpg|Paul Klufas programming
+Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|
+Image:DB7_plaining_work_surface_110116_csm.jpg|Planing an Al work surface
+Image:DB7_Heather_bandsaw_110116_csm.jpg|Heather cutting Al stock for pivots on the horizontal bandsaw
+Image:DB7_bandsaw_110116_csm.jpg|Al stock being cut on the bandsaw
+Image:DB7_Alex_Kellom_mill_110116_csm.jpg|Alex & Ben Kellom on the mill
 </gallery>