Difference between revisions of "DEWBOT VII Week Two Build Season Photo Gallery"
(→Sunday January 16, 2011) |
Saffranhill (talk | contribs) |
||
| Line 2: | Line 2: | ||
<gallery widths=250 heights=250 perrow=3> | <gallery widths=250 heights=250 perrow=3> | ||
Image:DB7_expanding_field_110116_csm.jpg|Expanding the practice field to full length | Image:DB7_expanding_field_110116_csm.jpg|Expanding the practice field to full length | ||
| − | Image: | + | Image:DB7_Molly_Kulick_arm_CAD_110116_csm-2.jpg|Molly & Rich Kulick work on the 4-bar linkage arm in Inventor |
| − | Image:DB7_Matt_Kellom_mill_110116_csm.jpg|Matt & Ben | + | Image:DB7_Matt_Kellom_mill_110116_csm.jpg|Matt & Ben Kellom working on the mill |
Image:DB7_Matt_mill_110116_csm.jpg|Matt running the mill | Image:DB7_Matt_mill_110116_csm.jpg|Matt running the mill | ||
Image:DB7_Ben_Deaver_reciprocating_saw_110116_csm.jpg|Ben with Gary Deaver cuts aluminum stock with the reciprocating saw | Image:DB7_Ben_Deaver_reciprocating_saw_110116_csm.jpg|Ben with Gary Deaver cuts aluminum stock with the reciprocating saw | ||
Image:DB7_Ben_Deaver_Heather_saw_110116_csm.jpg|Gary Deaver finishes the cut | Image:DB7_Ben_Deaver_Heather_saw_110116_csm.jpg|Gary Deaver finishes the cut | ||
Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|Matt & Corey | Image:DB7_Matt_Corey_mill_110116_csm_1.jpg|Matt & Corey | ||
| − | Image: | + | Image:DB7_Matt_Corey_Molly_Garrison_Ben_110116_csm.jpg|Matt, Corey, Molly, Garrison & Ben - the mill attracts attention! |
Image:DB7_programming_team_110116_csm.jpg|Programming team | Image:DB7_programming_team_110116_csm.jpg|Programming team | ||
Image:DB7_Paul_Klufas_110116_csm.jpg|Paul Klufas programming | Image:DB7_Paul_Klufas_110116_csm.jpg|Paul Klufas programming | ||
| Line 22: | Line 22: | ||
Image:DB7_Ben_110117_csm.jpg|Ben working on scoring grid frame | Image:DB7_Ben_110117_csm.jpg|Ben working on scoring grid frame | ||
Image:DB7_Kira_Garrison_110117_csm.jpg|Kira & Garrison moving the loading station | Image:DB7_Kira_Garrison_110117_csm.jpg|Kira & Garrison moving the loading station | ||
| − | Image: | + | Image:DB7_Molly_arm_110117_csm.jpg|Molly works on the prototype arm |
| − | Image: | + | Image:DB7_Molly_Kulick_110117_csm.jpg|Molly & Rich Kulick with prototype arm |
Image:DB7_field_pieces_110117_csm.jpg|Finished field pieces | Image:DB7_field_pieces_110117_csm.jpg|Finished field pieces | ||
| − | Image: | + | Image:DB7_Molly_Rich_Deaver_110117_csm.jpg|Molly, Rich Kulick & Gary Deaver discuss the arm |
Image:DB7_expanding_field_110117_csm.jpg|Kira, Ben, Garrison & Matt ''still'' expanding field to full length | Image:DB7_expanding_field_110117_csm.jpg|Kira, Ben, Garrison & Matt ''still'' expanding field to full length | ||
| − | Image:DB7_testing_prototype_110117_csm_1.jpg|Gary Deaver, | + | Image:DB7_testing_prototype_110117_csm_1.jpg|Gary Deaver, Molly & Rich Kulick testing the arm prototype |
Image:DB7_testing_prototype_110117_csm_2.jpg|''How high do we get?'' | Image:DB7_testing_prototype_110117_csm_2.jpg|''How high do we get?'' | ||
Image:DB7_new_prototype_110117_csm.jpg|New prototype | Image:DB7_new_prototype_110117_csm.jpg|New prototype | ||
| Line 36: | Line 36: | ||
==Wednesday January 19, 2011== | ==Wednesday January 19, 2011== | ||
<gallery widths=250 heights=250 perrow=3> | <gallery widths=250 heights=250 perrow=3> | ||
| − | Image: | + | Image:DB7_Alex_Kellom_Molly_110119_csm.jpg|Alex, Ben Kellom & Molly at the lathe |
Image:DB7_Ben_Yahya_110119_csm.jpg|Ben & Yahya at the lathe | Image:DB7_Ben_Yahya_110119_csm.jpg|Ben & Yahya at the lathe | ||
Image:DB7_Alex_drilling_pivot_spacers_110119_csm.jpg|Alex drilling a Pivot spacer | Image:DB7_Alex_drilling_pivot_spacers_110119_csm.jpg|Alex drilling a Pivot spacer | ||
Image:DB7_pivot_spacer_110119_csm.jpg|Pivot spacer on lathe | Image:DB7_pivot_spacer_110119_csm.jpg|Pivot spacer on lathe | ||
Image:DB7_Drew_Jack_Selina_110119_csm.jpg|Drew, Jack & Selina moving the old gates | Image:DB7_Drew_Jack_Selina_110119_csm.jpg|Drew, Jack & Selina moving the old gates | ||
| − | Image:DB7_arm_team_110119_csm.jpg|The Arm Team at work: Andrew, Sasha, | + | Image:DB7_arm_team_110119_csm.jpg|The Arm Team at work: Andrew, Sasha, Molly & Rich Kulick |
Image:DB7_side_plate_110119_csm.jpg|Pivot side plate | Image:DB7_side_plate_110119_csm.jpg|Pivot side plate | ||
Image:DB7_lathe_110119_csm.jpg|Lathe | Image:DB7_lathe_110119_csm.jpg|Lathe | ||
| − | Image:DB7_new_claw_110119_csm.jpg|Andrew, Sasha & | + | Image:DB7_new_claw_110119_csm.jpg|Andrew, Sasha & Molly with claw |
</gallery> | </gallery> | ||
| Line 53: | Line 53: | ||
Image:DB7_Carly_Jack_Matt_110120_csm.jpg|Carly, Jack & Matt | Image:DB7_Carly_Jack_Matt_110120_csm.jpg|Carly, Jack & Matt | ||
Image:DB7_finished_spacers_110120_csm.jpg|Finished spacers | Image:DB7_finished_spacers_110120_csm.jpg|Finished spacers | ||
| − | Image: | + | Image:DB7_Kulick_Molly_110120_csm.jpg|Rich Kulick & Molly work on claw |
Image:DB7_Carly_Faith_tower_110120_csm_1.jpg|Carly & Faith McKown assemble the bonus tower | Image:DB7_Carly_Faith_tower_110120_csm_1.jpg|Carly & Faith McKown assemble the bonus tower | ||
Image:DB7_Carly_Faith_tower_110120_csm_2.jpg|''The tower needs to be straight upright'' | Image:DB7_Carly_Faith_tower_110120_csm_2.jpg|''The tower needs to be straight upright'' | ||
Revision as of 16:31, 21 January 2011
Contents
Sunday January 16, 2011
Expanding the practice field to full length
- DB7 Molly Kulick arm CAD 110116 csm-2.jpg
Molly & Rich Kulick work on the 4-bar linkage arm in Inventor
Matt & Ben Kellom working on the mill
Matt running the mill
Ben with Gary Deaver cuts aluminum stock with the reciprocating saw
Gary Deaver finishes the cut
Matt & Corey
- DB7 Matt Corey Molly Garrison Ben 110116 csm.jpg
Matt, Corey, Molly, Garrison & Ben - the mill attracts attention!
Programming team
Paul Klufas programming
Planing an aluminum work surface
Heather cutting aluminum stock for pivots on the horizontal bandsaw
Aluminum stock being cut on the bandsaw
Alex & Ben Kellom on the mill
Monday January 17, 2011
Ben working on scoring grid frame
Kira & Garrison moving the loading station
- DB7 Molly arm 110117 csm.jpg
Molly works on the prototype arm
- DB7 Molly Kulick 110117 csm.jpg
Molly & Rich Kulick with prototype arm
Finished field pieces
- DB7 Molly Rich Deaver 110117 csm.jpg
Molly, Rich Kulick & Gary Deaver discuss the arm
Kira, Ben, Garrison & Matt still expanding field to full length
Gary Deaver, Molly & Rich Kulick testing the arm prototype
How high do we get?
New prototype
Testing the new prototype
Rich Kulick
Wednesday January 19, 2011
- DB7 Alex Kellom Molly 110119 csm.jpg
Alex, Ben Kellom & Molly at the lathe
Ben & Yahya at the lathe
Alex drilling a Pivot spacer
Pivot spacer on lathe
Drew, Jack & Selina moving the old gates
The Arm Team at work: Andrew, Sasha, Molly & Rich Kulick
Pivot side plate
Lathe
Andrew, Sasha & Molly with claw
Thursday January 20, 2011
Julie Kulick with Tetrix kit
Spacer on lathe
Carly, Jack & Matt
Finished spacers
- DB7 Kulick Molly 110120 csm.jpg
Rich Kulick & Molly work on claw
Carly & Faith McKown assemble the bonus tower
The tower needs to be straight upright
Gary Deaver & Selina get ready to broach keyways
Selina working on a gear
Gary Deaver gets serious
Julie Kulick & Matt - the chaingang
Matt breaking chain
Saturday January 22, 2011
- DB7 110122 csm.jpg
