Difference between revisions of "DEWBOT V Week Five Build Season Photo Gallery"

Revision as of 15:35, 20 June 2009

Mike Rizzo & Siri Maley assembling hopper uprights & spider on form
Siri Maley, Mike Rizzo, Matt Klufas & Clem McKown forming the outer spiral about a mandrel
Heather McKown finishing work on center cross support
Mike Rizzo & Siri Maley assembling hopper outer spiral
Heather McKown amused by hopper assembly
Hopper outer spiral clamped in preparation for welding
Siri Maley welding the hopper outer spiral
First attempt to bend inner spiral
Chassis with 7th wheel installed
Welded hopper with spider - still bolted to form
Jon Davis testing 7th wheel actuation
DB5 Klufas programming 090204 csm

Paul Klufas
Jon Davis finding the turntable center
Jon Davis & Siri Maley - center cross support clamped into position
Matt Klufas assembling the traverse drive unit
Foster Schucker & Matthew Rusnak working on chassis

@@ Line 17: / Line 17: @@
 File:DB5_7th_wheel_3_090204_csm.jpg
 File:DB5_welded_hopper_with_spider_090207_csm.jpg|Welded hopper with spider - still bolted to form
+File:DB5_Davis_testing_7th_wheel_090204_csm.jpg|Jon Davis testing 7th wheel actuation
+File:DB5_Klufas_programming_090204_csm|Paul Klufas
+File:DB5_Davis_finding_turntable_center_090204_csm.jpg|Jon Davis finding the turntable center
+File:DB5_finding_turntable_center_090204_csm.jpg
+File:DB5_Davis_Maley_center_cross_clamped_090204_csm.jpg|Jon Davis & Siri Maley - center cross support clamped into position
+File:DB5_center_cross_clamped_in_place_090204_csm.jpg
+File:DB5_Klufas_traverse_drive_090205_csm.jpg|Matt Klufas assembling the traverse drive unit
+File:DB5_Schucker_Rusnak_chassis_090205_csm.jpg|Foster Schucker & Matthew Rusnak working on chassis
 </gallery>
 ----
 [[Category:Robot]][[Category:DEWBOT V]][[Category:DEWBOT V Build]]