DEWBOT XIII Bumpers
From DEW Robotics
Revision as of 18:02, 7 May 2017 by MaiKangWei (talk | contribs)
Bumpers fully covered three sides of the robot, with an opening at the fuel intake/gear drop-off position. Due to the low position of bumpers in SteamWorks, bumpers mounted to the lower flange of the chassis frame. An advantage of the bumper's low position is that the bumpers prevented balls (fuel) from getting under the chassis; bumpers pushed fuel away rather than over-riding it.
Bumpers are 2-piece; left & right.
