DEWBOT XII Week Six Build Season Photo Gallery
Contents
Sunday February 14, 2016
Charley & Braden with e-panel
Deux's e-panel
Charley & Braden drill mounting holes on Prime's chassis
Scott Featherman, Abbi, Laura & Dana
Keith Williams & Madi welding Prime's catapult
Prime's chassis being painted
Braden securing mounting plates
Prime's catapult
Grooving a polyurethane roller on the CNC lathe
Andrew Weissman and Madi assemble a boulder pick-up
Paul broaching catapult cam
Douglas lines up parts for welding
Grooved polyurethane roller for ball pick-up
Catapult being painted
Laura, Abbi & Douglas
Portcullis lift in welding
Painted parts curing (in the relatively warm classroom)
Assembling Deux
Portcullis lift in welding
Assembling Deux
Laura, Abbi & Douglas with portcullis lift
Deux's chassis on scale - 67.7 lbm
...adding catapult, ball collector, rollers & portcullis lift - 79.7 lbm
Monday February 15, 2016
Abbi works on Deux
Larry Dodds
Fatima preparing Prime's ball intake for painting
Paul tapping
Larry Dodds, Clem McKown, Matthew L & Dana work on Deux's pneumatics
Fatima with intake
Gary with Prime's chassis
Laura programs Deux
Keith Williams & Abbi with Prime's portcullis lift - our last weldment completed!
Tuesday February 16, 2016
Alicia works the old lathe w/ Abbi
Ciaren on the CNC lathe
Abbi
Paul & Fatima
Paul on mill
Clem McKown, John Weissman, Laura, Gary Deaver & Scott Featherman work through some pneumatic issues
Wednesday February 17, 2016
Paul drills holes for the catapult motor mount on prime
Josh B lays out gel coat on glass in preparation for laying down composite electrical panel
Jarryd drilling hole fro spring anchor on prime's chassis frame
Gary Deaver w/ Josh B & Ciaren - first sheet of carbon fiber
Smoothing out the carbon fiber
Sandwich complete
Larry Dodds & Abbi work on the ball intake
Bradon, Paul & Abbi
Gary Deaver inspects the ball intake
Thursday February 18, 2016
BaneBot P80 reduction stages
Alicia & Paul drill hole for additional spacer in Prime's drive module plates
Eric lubricating P80 gearboxes
Testing the ball intake
Testing the ball intake
Eric assembling P80 gearboxes
144:1 BainBot P80s with CIMs for 2 robots & spare
Eric, Dana, Laura & Alicia install the drive modules on prime
Abbi works on deux
Friday February 19, 2016
Additional spacer added to prime to prevent bearing loss at driveshaft end
Alicia
Fatima & Abbi
Dana & Paul
Testing the three camera vision system
John Weissman & Abbi
