Difference between revisions of "DEWBOT XVI Final Daze Build Season Photo Gallery"
From DEW Robotics
MaiKangWei (talk | contribs) (→Sunday February 23, 2020) |
MaiKangWei (talk | contribs) (→Sunday February 23, 2020) |
||
| Line 6: | Line 6: | ||
image:DB16_Build_20200223-4.jpg| | image:DB16_Build_20200223-4.jpg| | ||
image:DB16_Build_20200223-5.jpg|Bottom of Climber Extension - Bronze Leadscrew Nut (turned down) inside a 1" OD x 0.028" wall steel tube inside a printed square linear bearing, all held together with four 6-32 x 7/16" SHCSs which thread into the Leadscrew Nut. This all travels within a 1-1/2" x 1/16" wall 6061 Al square tube. | image:DB16_Build_20200223-5.jpg|Bottom of Climber Extension - Bronze Leadscrew Nut (turned down) inside a 1" OD x 0.028" wall steel tube inside a printed square linear bearing, all held together with four 6-32 x 7/16" SHCSs which thread into the Leadscrew Nut. This all travels within a 1-1/2" x 1/16" wall 6061 Al square tube. | ||
| − | image:DB16_Build_20200223-6.jpg| | + | image:DB16_Build_20200223-6.jpg|Aerin adds limit switches to Prime's Climber. |
image:DB16_Build_20200223-7.jpg| | image:DB16_Build_20200223-7.jpg| | ||
image:DB16_Build_20200223-8.jpg| | image:DB16_Build_20200223-8.jpg| | ||
Revision as of 01:49, 24 February 2020
Contents
Sunday February 23, 2020
Bottom of Climber Extension - Bronze Leadscrew Nut (turned down) inside a 1" OD x 0.028" wall steel tube inside a printed square linear bearing, all held together with four 6-32 x 7/16" SHCSs which thread into the Leadscrew Nut. This all travels within a 1-1/2" x 1/16" wall 6061 Al square tube.
Aerin adds limit switches to Prime's Climber.
