FTC 7314 Engineering Notebook 2014-11-03

From DEW Robotics
Revision as of 02:01, 4 November 2014 by Jcbc (talk | contribs) (Created page with '=='''Competition Season Meeting'''== <!-- This is the meeting information table --> {|border=1 cellpadding="10" !Meeting Date !!Meeting Time !!Location !!Attendees |- | | |TCH...')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Competition Season Meeting

Meeting Date Meeting Time Location Attendees
TCHS Brandywine

Tasks Reflections
Putting holes in inner slide connectors
  • Justin, Josh, and Andrew worked with the mill to put holes in the connectors for screws despite the mill not working at all and needing two mentors with good skill in the mill to fix it but in the end we finished all of them in ten minutes.
  • Josh, Justin, and Andrew finished drilling all of the holes for the sliders even with problems from the mill.
Center of gravity solution
  • Brad and Braden brainstormed on ways to make the enter of gravity lower, and worked out three solutions; widen the wheels, lower the top part, or add more weight to the base.
  • we were able to find a better way to balance the center of gravity.

Recorded by: Date: Journal Editor: Date: