Difference between revisions of "FTC 7314 Engineering Notebook 2014-11-23"

From DEW Robotics
Jump to: navigation, search
(Created page with '=='''Competition Season Meeting'''== <!-- This is the meeting information table --> {|border=1 cellpadding="10" !Meeting Date !!Meeting Time !!Location !!Attendees |- |Sunday, N...')
 
(Competition Season Meeting)
Line 17: Line 17:
 
!Tasks !! Reflections
 
!Tasks !! Reflections
 
|-  
 
|-  
| '''Task in bold'''
+
| '''Mechanical Work'''
 +
|
 +
*Trevor cut PVC with the bandsaw and dremel tool. Trevor also used the belt sander on PVC and an axle.
 +
|-
 +
| '''Electrical Work'''
 
|  
 
|  
* Bullet point for each reflection
+
* Mentor Julie, Laura, and Akhila worked on figuring out a realistic electrical configuration, thinking that the robot should built around this.
 +
* Akhila then made a schematic in LabVIEW, as well as a schematic in Paint to create a visual of how everything would be wired.
 
|-
 
|-
|-
+
| ''' Braden and  josh worked on putting the linear slide and shooting system together''
| '''Task in bold'''
+
*CJ with the help of Mentor Julie created a autonomous program that would go along with Nick and Laura's program. The program in theory can now drive until it comes into contact with the Ir then stop within an approximate time period.
 
|  
 
|  
* Bullet point for each reflection
+
* Braden was able to get parts of the linear slide cut and parts of the linear slide on the robot
 
+
* Josh developed millophobia as he had to mill all of the pieces to 2.5 inches
 
|} <!-- End of tasks table; DO NOT REMOVE -->
 
|} <!-- End of tasks table; DO NOT REMOVE -->
  

Revision as of 22:00, 23 November 2014

Competition Season Meeting

Meeting Date Meeting Time Location Attendees
Sunday, November 23, 2014 Nick, Akhila, Laura, CJ, Brad, Braden, Josh, Trevor TCHS Brandywine


Tasks Reflections
Mechanical Work
  • Trevor cut PVC with the bandsaw and dremel tool. Trevor also used the belt sander on PVC and an axle.
Electrical Work
  • Mentor Julie, Laura, and Akhila worked on figuring out a realistic electrical configuration, thinking that the robot should built around this.
  • Akhila then made a schematic in LabVIEW, as well as a schematic in Paint to create a visual of how everything would be wired.
' Braden and josh worked on putting the linear slide and shooting system together
  • CJ with the help of Mentor Julie created a autonomous program that would go along with Nick and Laura's program. The program in theory can now drive until it comes into contact with the Ir then stop within an approximate time period.
  • Braden was able to get parts of the linear slide cut and parts of the linear slide on the robot
  • Josh developed millophobia as he had to mill all of the pieces to 2.5 inches

Action and idea Journal



Recorded by: Date: Journal Editor: Date: