Difference between revisions of "FTC 7314 Engineering Notebook 2015-01-05"

From DEW Robotics
Jump to: navigation, search
(Competition Season Meeting)
Line 19: Line 19:
 
| '''STUFFS IN THE STUFF'''
 
| '''STUFFS IN THE STUFF'''
 
|
 
|
* Josh attempted to take off the omniwheel, but unfortunately lost the sprocket for the chain drive. He searched and searched and searched and searched and finally... he searched. Josh eventually found the sprocket and fixed the wheel so it could be bored.
+
* Josh attempted to take off the omni-wheel, but unfortunately lost the sprocket for the chain drive. He searched for a long time and finally found the sprocket and fixed the wheel so it could be bored.
 
* Amal and Josh helped Gary the Plumber with the wiring.
 
* Amal and Josh helped Gary the Plumber with the wiring.
* We used a heat glue to heat the tube full of wires.  
+
* We used a heat gun to make a prototype of our coiled cable for a servo motor attached to the top of our diverter. The heat gun was used to heat the tube full of wires. We didn't like the prototype. It provided too much tension on the linear slide.  
* Amal a=was mostly using the heat glue.
+
* Amal used the heat glue the most.  
* The potential drive teeeeeeeeeeeem took a test to see if the members know the rules.
+
* Trevor and Eric glued the 3D printed logo and numbers onto the robot. Trevor had printed them on his 3D printer.
* Trevor and Eric glued the 3d printed logo and numbers Trevor printed.
 
 
|-
 
|-
 
| '''Changed motor'''
 
| '''Changed motor'''
Line 34: Line 33:
 
* The team all took the written portion of the driving test, which talked about all of the rules and what the team would get penalized for.  Everyone had to take the test, and the people with the best scores would be put into consideration for the drive teams.
 
* The team all took the written portion of the driving test, which talked about all of the rules and what the team would get penalized for.  Everyone had to take the test, and the people with the best scores would be put into consideration for the drive teams.
 
| '''
 
| '''
 
|} <!-- End of tasks table; DO NOT REMOVE -->
 
 
<br />
 
 
<!-- This is the footer for a meeting entry -->
 
{| border=1 width=100% <!-- &nbsp;s are needed to create blank space in HTML -->
 
! Recorded by:
 
! Date:
 
! Journal Editor:
 
! Date:
 
|- <!-- <br />s are needed to create line breaks for empty lines in HTML -->
 
|<br /><br />
 
|<br /><br />
 
|<br /><br />
 
|<br /><br />
 
|}
 
----
 
[[Category:FTC]][[Category:Cascade Effect]]
 
 
=='''Competition Season Meeting'''==
 
 
<!-- This is the meeting information table -->
 
{|border=1 cellpadding="10"
 
!Meeting Date !!Meeting Time !!Location !!Attendees
 
|-
 
|
 
|
 
| TCHS Brandywine
 
|
 
|}
 
 
<br />
 
 
<!-- This is Tasks and Reflections table -->
 
{|border=1 cellpadding="10"
 
!Tasks !! Reflections
 
|-
 
| '''Task in bold'''
 
|
 
* Bullet point for each reflection
 
|-
 
| '''Task in bold'''
 
|
 
* Bullet point for each reflection
 
  
 
|} <!-- End of tasks table; DO NOT REMOVE -->
 
|} <!-- End of tasks table; DO NOT REMOVE -->

Revision as of 00:26, 13 January 2015

Competition Season Meeting

Meeting Date Meeting Time Location Attendees
Monday, January 5, 2015 6pm-9pm TCHS Brandywine Akhila, Josh, Justin, Braden, Amal, Brad, Eric


Tasks Reflections
STUFFS IN THE STUFF
  • Josh attempted to take off the omni-wheel, but unfortunately lost the sprocket for the chain drive. He searched for a long time and finally found the sprocket and fixed the wheel so it could be bored.
  • Amal and Josh helped Gary the Plumber with the wiring.
  • We used a heat gun to make a prototype of our coiled cable for a servo motor attached to the top of our diverter. The heat gun was used to heat the tube full of wires. We didn't like the prototype. It provided too much tension on the linear slide.
  • Amal used the heat glue the most.
  • Trevor and Eric glued the 3D printed logo and numbers onto the robot. Trevor had printed them on his 3D printer.
Changed motor
  • Justin changed a motor for the bapper that Josh smoked on Saturday.
Testing
  • The team all took the written portion of the driving test, which talked about all of the rules and what the team would get penalized for. Everyone had to take the test, and the people with the best scores would be put into consideration for the drive teams.


Recorded by: Date: Journal Editor: Date: