Difference between revisions of "FTC 7314 Engineering Notebook 2016-04-12"

Latest revision as of 23:11, 24 April 2016

Meeting Date	Meeting Time	Location	Team Members in Attendance:
12 April 2016	6pm-9pm	TCHS Brandywine	Akhila, Snarr, Trevor, Amal, Daniel, Matt, Bennett

Tasks	Reflections
Button Factory	Matt and Amal were makingź buttons for worlds! Akhila helped them out by printing the buttons for them and helping them center it as well. Amal centered all the buttons while Matt was actually putting the buttons together. We did about 2 buttons per minute from the scratch to the end. In total, we did 74 buttons!!
Wiring	Josh, Braden, and Bennett were working on rewiring the robot. Josh’s Grandfather helped out the students in their wiring and corrected former errors on the robot. They labeled all the wires and where they go on a diagram so they could make sure everything was organized to reduce confusion and minimize problems with the wires so the team have one less thing to worry about at worlds.
Debris Tubes	Trevor and Akhila were making new duplicates of our debris tubes where we store the debris. They did this because the new ones are slightly wider so the debris won’t get jammed in the tubes.

@@ Line 24: / Line 24: @@
 |-
 |'''Wiring'''
+|
 *Josh, Braden, and Bennett were working on rewiring the robot. Josh’s Grandfather helped out the students in their wiring and corrected former errors on the robot. They labeled all the wires and where they go on a diagram so they could make sure everything was organized to reduce confusion and minimize problems with the wires so the team have one less thing to worry about at worlds.
 |-
 |-
 |'''Debris Tubes'''
+|
 * Trevor and Akhila were making new duplicates of our debris tubes where we store the debris. They did this because the new ones are slightly wider so the debris won’t get jammed in the tubes.
 |-