Difference between revisions of "Sine Plate"
From DEW Robotics
MaiKangWei (talk | contribs) (→Photo Gallery) |
MaiKangWei (talk | contribs) (→Photo Gallery) |
||
| Line 1: | Line 1: | ||
==Photo Gallery== | ==Photo Gallery== | ||
<gallery widths=250 heights=250 perrow=3> | <gallery widths=250 heights=250 perrow=3> | ||
| + | image:MadiCuts.jpg|Cutting the steel plate halves | ||
image:FullSizeRender.jpg|The plate halves beveled at 30 degrees with a 1/8" land | image:FullSizeRender.jpg|The plate halves beveled at 30 degrees with a 1/8" land | ||
image:IMG_4509.JPG|The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes | image:IMG_4509.JPG|The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes | ||
| − | |||
image:SwitchParts.JPG|Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead | image:SwitchParts.JPG|Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead | ||
image:0830150948.jpg| | image:0830150948.jpg| | ||
Revision as of 23:04, 1 November 2015
Photo Gallery
Cutting the steel plate halves
The plate halves beveled at 30 degrees with a 1/8" land
The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes
Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead
Facing one side of a sine plate
Keith Williams with Paul & CJ milling a sine plate
Milled plate
Milled plate
