Difference between revisions of "Sine Plate"

Revision as of 00:28, 15 January 2016

Cutting the steel plate halves
The plate halves beveled at 30 degrees with a 1/8" land
The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes
Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead
Facing one side of a sine plate
Keith Williams with Paul & CJ milling a sine plate
Milled plate
Milled plate
Milling cylindrical groove in sine plate
Keith Williams & Joshua B
Finished piece
Test bolt pattern on lower plate
Both plates

@@ Line 18: / Line 18: @@
 image:DB11_151216-2.jpg|Keith Williams & Joshua B
 image:DB11_151216-6.jpg|Finished piece
+image:Bolt_plate.jpg|Test bolt pattern on lower plate
+image:Both_plates.jpg|Both plates
 </gallery>
 ----
 [[Category:DEWBOT XI]][[Category:Engineering]][[Category:Photo Galleries]][[Category:Projects]]