Difference between revisions of "Sine Plate"

Latest revision as of 00:35, 15 January 2016

Cutting the steel plate halves
The plate halves beveled at 30 degrees with a 1/8" land
The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes
Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead
Facing one side of a sine plate
Keith Williams with Paul & CJ milling a sine plate
Milled plate
Milled plate
Milling cylindrical groove in sine plate
Keith Williams & Joshua B
Finished piece
Test bolt pattern on lower plate
Both plates

@@ Line 1: / Line 1: @@
 ==Photo Gallery==
 <gallery widths=250 heights=250 perrow=3>
+image:MadiCuts.jpg|Cutting the steel plate halves
+image:FullSizeRender.jpg|The plate halves beveled at 30 degrees with a 1/8" land
+image:IMG_4509.JPG|The finished upper plate.  Welded with a 5/32 root opening. 5/32 E6010 root pass.  5/32 E7016 fill and cap passes
+image:SwitchParts.JPG|Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead
+image:0830150948.jpg|
+image:IMG 315.JPG|Facing one side of a sine plate
 image:Sine_Plate_151028-1.jpg|Keith Williams with Paul & CJ milling a sine plate
 image:Sine_Plate_151028-2.jpg|Milled plate
 image:Sine_Plate_151028-4.jpg|Milled plate
 image:Sine_Plate_151028-3.jpg|
+image:DB11_Mill_151104-1.jpg|
+image:DB11_Mill_151104-4.jpg|
+image:DB11_Mill_151104-2.jpg|
+image:DB11_Mill_151104-3.jpg|
+image:DB11_151216-1.jpg|Milling cylindrical groove in sine plate
+image:DB11_151216-2.jpg|Keith Williams & Joshua B
+image:DB11_151216-6.jpg|Finished piece
+image:Bolt_plate.jpg|Test bolt pattern on lower plate
+image:Both_plates.jpg|Both plates
+image:Near_finish2.jpg|
+image:Near_finish1.jpg|
 </gallery>
 ----
-[[Category:DEWBOT XI]][[Category:Engineering]][[Category:Photo Galleries]]
+[[Category:DEWBOT XI]][[Category:Engineering]][[Category:Photo Galleries]][[Category:Projects]]