Difference between revisions of "Sine Plate"
From DEW Robotics
m |
|||
| Line 20: | Line 20: | ||
image:Bolt_plate.jpg|Test bolt pattern on lower plate | image:Bolt_plate.jpg|Test bolt pattern on lower plate | ||
image:Both_plates.jpg|Both plates | image:Both_plates.jpg|Both plates | ||
| + | image:Near_finish2.jpg| | ||
| + | image:Near_finish1.jpg| | ||
</gallery> | </gallery> | ||
---- | ---- | ||
[[Category:DEWBOT XI]][[Category:Engineering]][[Category:Photo Galleries]][[Category:Projects]] | [[Category:DEWBOT XI]][[Category:Engineering]][[Category:Photo Galleries]][[Category:Projects]] | ||
Latest revision as of 00:35, 15 January 2016
Photo Gallery
Cutting the steel plate halves
The plate halves beveled at 30 degrees with a 1/8" land
The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes
Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead
Facing one side of a sine plate
Keith Williams with Paul & CJ milling a sine plate
Milled plate
Milled plate
Milling cylindrical groove in sine plate
Keith Williams & Joshua B
Finished piece
Test bolt pattern on lower plate
Both plates
