Sine Plate

From DEW Robotics
Revision as of 00:35, 15 January 2016 by Kwilliams (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Photo Gallery

  • Cutting the steel plate halves

  • The plate halves beveled at 30 degrees with a 1/8" land

  • The finished upper plate. Welded with a 5/32 root opening. 5/32 E6010 root pass. 5/32 E7016 fill and cap passes

  • Main current switch on the welder failed, can't buy one, so we rebuilt it and brought it back from the dead

  • 0830150948.jpg

  • Facing one side of a sine plate

  • Keith Williams with Paul & CJ milling a sine plate

  • Milled plate

  • Milled plate

  • Sine Plate 151028-3.jpg
  • DB11 Mill 151104-1.jpg
  • DB11 Mill 151104-4.jpg
  • DB11 Mill 151104-2.jpg
  • DB11 Mill 151104-3.jpg

  • Milling cylindrical groove in sine plate

  • Keith Williams & Joshua B

  • Finished piece

  • Test bolt pattern on lower plate

  • Both plates

  • Near finish2.jpg
  • Near finish1.jpg
Retrieved from "https://team1640.com/wiki/index.php?title=Sine_Plate&oldid=26726"