Difference between revisions of "Stronghold Meeting -13-Feb-2016"
From DEW Robotics
(→CAD & Design) |
(→Programming) |
||
(2 intermediate revisions by one other user not shown) | |||
Line 11: | Line 11: | ||
|} | |} | ||
==CAD & Design== | ==CAD & Design== | ||
− | + | Today we drilled holes for the electronics board. We also added sensors to some of our talons, and finalized their placement. | |
==Mechanical== | ==Mechanical== | ||
+ | Welding: Today we finished Prime's chassis, as well as Deux's catapult and intake system. | ||
==Programming== | ==Programming== | ||
+ | |||
+ | -Today we completed a more in depth test of the NavX MXP | ||
+ | |||
+ | :- First, we made sure the gyro followed the right hand rule, and went from 0 - 360 (not -180 to 180) | ||
+ | |||
+ | :- Then we tested to make sure a turn of 90 degrees resulted in a gyro reading of 90 degrees. | ||
+ | |||
+ | :- We also implemented and tested a gyro reset. | ||
==Strategy== | ==Strategy== |
Latest revision as of 21:35, 16 February 2016
Contents
Competition Season Meeting
Meeting Date | Meeting Time | Location | Attendees |
---|---|---|---|
TCHS Brandywine |
CAD & Design
Today we drilled holes for the electronics board. We also added sensors to some of our talons, and finalized their placement.
Mechanical
Welding: Today we finished Prime's chassis, as well as Deux's catapult and intake system.
Programming
-Today we completed a more in depth test of the NavX MXP
- - First, we made sure the gyro followed the right hand rule, and went from 0 - 360 (not -180 to 180)
- - Then we tested to make sure a turn of 90 degrees resulted in a gyro reading of 90 degrees.
- - We also implemented and tested a gyro reset.
Strategy
Field Elements
Other
Recorded by: | Date: | Journal Editor: | Date: |
---|---|---|---|