Stronghold Meeting - 20-Jan-2016

From DEW Robotics
Revision as of 18:57, 28 January 2016 by Aweissman7 (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Competition Season Meeting

Meeting Date Meeting Time Location Attendees
TCHS Brandywine

CAD & Design

-Scaling Crayola CAD began as we attempt to determine if our robot width would interfere with other robots scaling. If so, an order of scaling will need to be established prior to each match.


-The catapult was revised to test whether a pneumatic release was practical.

-The AM14U2 kitbot received almost all of its necessary changes. The wheels are all attached and crossbars are installed. All that remains is breaking some chain for the gearbox reduction.

-Using the dimensions from the Crayola CAD, an intake prototype was developed. Some dimensions needed to be changed, but it does work!

-A prototype tread drive was made from plywood so we can run tests with it with some prototype tread.



Field Elements

-The tower is complete!


Recorded by: Date: Journal Editor: Date: