Difference between revisions of "DEWBOT XV Lift"
From DEW Robotics
MaiKangWei (talk | contribs) (Created page with "The Lift changes the level (height abobe grade) of the Hatch and Cargo scoring systems. Key lift objectives and design points are: * It needs to be ''fast''! <1 sec transit...") |
(No difference)
|
Revision as of 01:59, 29 March 2019
The Lift changes the level (height abobe grade) of the Hatch and Cargo scoring systems.
Key lift objectives and design points are:
- It needs to be fast! <1 sec transit time from bottom to top positions
- For speed, use lift rather than arm
- Power-up experience was valuable for design purposes. 1640's Deep Space lift is very different from Power-Up's; it's faster!
- A fast lift is a light lift. Design focus was on minimizing mass of materials lifted
- A corollary of the above point: The Lift should not be used as the forward component of the HAB Lift
- (3) stages needed to meet height constraints & scoring range
- While cascade was clearly preferred, this was not practical in light of the need to start in Hatch-scoring configuration (not full down) - so serial lift employed
- Power lift both up and down (don't rely on gravity)
- 1" x 1" x 1/16" 7075 Al square tubing was used for the majority of the lift
- (2) 775PRO motors needed to drive the Lift, at 35:1 reduction and 2 inch diam spools for cable (1/8" string)