Difference between revisions of "FTC 7314 Engineering Notebook 2014-10-29"

From DEW Robotics
Jump to: navigation, search
(Created page with '=='''Competition Season Meeting'''== <!-- This is the meeting information table --> {|border=1 cellpadding="10" !Meeting Date !!Meeting Time !!Location !!Attendees |- | | |TCH...')
 
(→‎Competition Season Meeting)
Line 16: Line 16:
 
{|border=1 cellpadding="10"
 
{|border=1 cellpadding="10"
 
!Tasks !! Reflections
 
!Tasks !! Reflections
 +
"FRC lessons"
 +
*CJ and Laura went to learn and complete tasks in FRC. CJ watched a presentation on CAD and tasks in a FRC build season. He learned about how to use CAD to create complex parts and assemblies. Additionally, he learned on what to do after a game release and how to use the 6 weeks given in FRC efficiently. The knowledge gathered from the presentation gave him ideas on completing the robot efficiently in a reasonable time period. 
 
|-  
 
|-  
−
| '''Task in bold'''
+
| '''Mounting IR beacon sensor'''
 
|  
 
|  
−
* Bullet point for each reflection
+
* Josh worked to mount the sensor for the IR beacon so it would stay in the 18in. box. he completed this task with around 1/2 inches to spare.
 
|-
 
|-
 
|-  
 
|-  
−
| '''Task in bold'''
+
| '''reverse gabber servo motors'''
 
|  
 
|  
−
* Bullet point for each reflection
+
* Josh had to work with Laura to reverse the servo motors due to the wires connecting it to the controller were on the outside.
 +
|-
 +
|-
 +
|'''Change battery position'''
 +
|
 +
* Josh changed the battery position from the top of the robot to the back due to the top-heaviness when it was on top.
 +
|-
 +
|-
 +
|'''mounted servo controller'''
 +
|
 +
* Josh mounted the servo controller next to the battery.
 +
|-
 +
|-
 +
|'''mounted power switch plate that shows that it is a power switch'''
 +
|
 +
*josh cut plastic then attached it to the top next to the power switch.
 +
|-
 +
|-
 +
|***Enter task here'''
 +
|
 +
*enter description
  
 
|} <!-- End of tasks table; DO NOT REMOVE -->
 
|} <!-- End of tasks table; DO NOT REMOVE -->

Revision as of 01:04, 30 October 2014

Competition Season Meeting

Meeting Date Meeting Time Location Attendees
TCHS Brandywine


Tasks Reflections

"FRC lessons"

  • CJ and Laura went to learn and complete tasks in FRC. CJ watched a presentation on CAD and tasks in a FRC build season. He learned about how to use CAD to create complex parts and assemblies. Additionally, he learned on what to do after a game release and how to use the 6 weeks given in FRC efficiently. The knowledge gathered from the presentation gave him ideas on completing the robot efficiently in a reasonable time period.
Mounting IR beacon sensor
  • Josh worked to mount the sensor for the IR beacon so it would stay in the 18in. box. he completed this task with around 1/2 inches to spare.
reverse gabber servo motors
  • Josh had to work with Laura to reverse the servo motors due to the wires connecting it to the controller were on the outside.
Change battery position
  • Josh changed the battery position from the top of the robot to the back due to the top-heaviness when it was on top.
mounted servo controller
  • Josh mounted the servo controller next to the battery.
mounted power switch plate that shows that it is a power switch
  • josh cut plastic then attached it to the top next to the power switch.
***Enter task here
  • enter description


Recorded by: Date: Journal Editor: Date:








Retrieved from "https://team1640.com/wiki/index.php?title=FTC_7314_Engineering_Notebook_2014-10-29&oldid=21960"