| Tasks |
Reflections
|
| FRC lessons
|
- CJ and Laura went to learn and complete tasks in FRC. CJ watched a presentation on CAD and tasks in a FRC build season. He learned about how to use CAD to create complex parts and assemblies. Additionally, he learned on what to do after a game release and how to use the 6 weeks given in FRC efficiently. The knowledge gathered from the presentation gave him ideas on completing the robot efficiently in a reasonable time period.
|
| Mounting IR beacon sensor
|
- Josh worked to mount the sensor for the IR beacon so it would stay in the 18in. box. He completed this task with around 1/2 inches to spare.
It was mounted to a servo so it could extend to the appropriate height for the IR beacon.
|
| Reverse goal grabber servo motors
|
- Josh had to work with Laura to reverse the servo motors due to the wires connecting it to the controller were on the outside.
|
| Change battery position
|
- Josh changed the battery position from the top of the robot to the back due to the top-heaviness when it was on top.
|
| mounted servo controller
|
- Josh mounted the servo controller next to the battery.
|
| mounted power switch plate that shows that it is a power switch
|
- josh cut plastic then attached it to the top next to the power switch.
|
| ***Enter task here
|
|
