Difference between revisions of "FTC 7314 Engineering Notebook 2015-10-26"

Revision as of 00:41, 27 October 2015

Meeting Date	Meeting Time	Location	Attendees
26-October-2015	6:00-9:00 PM	TCHS Brandywine

Objectives / Systems	Hypotheses, tests, observations, conclusions, plans
Objective in bold	Bullet point for each hypothesis, test, observation, conclusion, plan
Objective in bold	Bullet point for each hypothesis, test, observation, conclusion, plan

Tasks	Reflections
Braden and Bennett worked on sanding and customizing for parts to go on the axle Braden worked hard to find the best method to sand the axles.this took a long time for braden to figure out. Besides working with Braden on sanding, Bennett Cut the polycarbonate and drilled the bolt holes.	Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.
Programing lesson	Justin listened to the programing part of our operation. Justin also helped in the workshop. Amal was helping to program the color sensor. Amal also listened and watch Akhila program on her laptop.
painting and worm gear assembly	Trent helped Clem build the worm gear and dried the metal pieces for him.
finish welding chassis	Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.

Recorded by:	Date:	Journal Editor:	Date:

@@ Line 33: / Line 33: @@
 !Tasks !! Reflections
 |-
-| '''finish welding chassis'''
+| '''Braden and Bennett worked on sanding and customizing for parts to go on the axle'''
+*Braden worked hard to find the best method to sand the axles.this took a long time for braden to figure out.
+*Besides working with Braden on sanding, Bennett Cut the polycarbonate and drilled the bolt holes.
 |
 * Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.