Difference between revisions of "FTC 7314 Engineering Notebook 2015-10-26"

Revision as of 00:48, 27 October 2015

Meeting Date	Meeting Time	Location	Attendees
26-October-2015	6:00-9:00 PM	TCHS Brandywine

Objectives / Systems	Hypotheses, tests, observations, conclusions, plans
Objective in bold	Bullet point for each hypothesis, test, observation, conclusion, plan
Objective in bold	Bullet point for each hypothesis, test, observation, conclusion, plan

today we had tried to get the color sensors working there were some problums we ran into but we worked out most of the kinks. I feel that I was less productive today then the last meet, I was tiard and distraced. I could have pone better

Tasks	Reflections
Braden and Bennett worked on sanding and customizing for parts to go on the axle Braden worked hard to find the best method to sand the axles.this took a long time for braden to figure out. Besides working with Braden on sanding, Bennett Cut the polycarbonate and drilled the bolt holes.	Trevor, Josh, Matt, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension. Matt helped Keith refill the spool on the spool gun
Driving Practice	Myles worked on his driving using a smaller robot made by Daniel.
Programing lesson	Justin listened to the programing part of our operation. Justin also helped in the workshop. Amal was helping to program the color sensor. Amal also listened and watch Akhila program on her laptop.
painting and worm gear assembly	Trent helped Clem build the worm gear and dried the metal pieces for him.
finish welding chassis	Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.

Recorded by:	Date:	Journal Editor:	Date:

@@ Line 37: / Line 37: @@
 *Besides working with Braden on sanding, Bennett Cut the polycarbonate and drilled the bolt holes.
 |
-* Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.
+* Trevor, Josh, Matt, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.
+* Matt helped Keith refill the spool on the spool gun
+|-
+| '''Driving Practice'''
+|
+* Myles worked on his driving using a smaller robot made by Daniel.
 |-
 | '''Programing lesson'''
@@ Line 52: / Line 57: @@
 * Trevor, Josh, and mentor Keith worked to finish the chassis which was begun on Wednesday. In the making of this chassis we also started the extension.
 |-
+* today we had tried to get the color sensors working there were some problums we ran into but we worked out most of the kinks. I feel that I was less productive today then the last meet, I was tiard and distraced. I could have pone better
 |} <!-- End of tasks table; DO NOT REMOVE -->