Difference between revisions of "FTC 7314 Engineering Notebook 2015-10-26"
From DEW Robotics
Akhila2014 (talk | contribs) (→Competition Season Meeting) |
Akhila2014 (talk | contribs) (→Competition Season Meeting) |
||
Line 22: | Line 22: | ||
* Matt helped Keith refill the spool on the spool gun. Matt also helped in the welding of the chassis and got to see some welding in action. Matt hopes to be able to join the welding team in the future. | * Matt helped Keith refill the spool on the spool gun. Matt also helped in the welding of the chassis and got to see some welding in action. Matt hopes to be able to join the welding team in the future. | ||
* Trent worked with mentor Clem to paint the chassis parts after they had been welded. Care was taken to clean and dry the parts prior to painting. | * Trent worked with mentor Clem to paint the chassis parts after they had been welded. Care was taken to clean and dry the parts prior to painting. | ||
− | |||
|} <!-- End of tasks table; DO NOT REMOVE --> | |} <!-- End of tasks table; DO NOT REMOVE --> | ||
Line 36: | Line 35: | ||
*Braden worked hard to find the best method to sand the axles in order to fit the bearings. This took a long time for Braden to figure out. | *Braden worked hard to find the best method to sand the axles in order to fit the bearings. This took a long time for Braden to figure out. | ||
* Besides working with Braden on sanding, Bennett Cut the polypropylene floor panel and drilled the bolt holes. | * Besides working with Braden on sanding, Bennett Cut the polypropylene floor panel and drilled the bolt holes. | ||
− | * Braden taught Daniel how to use the lathe. Daniel plans to use this knowledge in order to benefit the team in the future. | + | * Braden taught Daniel how to use the lathe. Daniel plans to use this knowledge in order to benefit the team in the future. |
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
| '''Driving Practice''' | | '''Driving Practice''' |
Latest revision as of 06:46, 4 December 2015
Competition Season Meeting
Meeting Date | Meeting Time | Location | Attendees |
---|---|---|---|
26-October-2015 | 6:00-9:00 PM | TCHS Brandywine | Trevor, Josh, Daniel, Braden, Seth, Akhila, Amal, Bennett, Matt, Trent, Myles, Justin, Wade |
Objectives / Systems | Hypotheses, tests, observations, conclusions, plans |
---|---|
Chassis Fabrication |
|
Tasks | Reflections |
---|---|
Axle Preparation |
|
Driving Practice |
|
Programming |
|
Worm gear assembly |
|
finish welding chassis |
|
Action and idea Journal
Recorded by: | Date: | Journal Editor: | Date: |
---|---|---|---|