Difference between revisions of "FTC 7314 Engineering Notebook 2015-12-28"

Revision as of 02:05, 29 December 2015

Meeting Date	Meeting Time	Location	Attendees
		TCHS Brandywine

Objectives / Systems	Hypotheses, tests, observations, conclusions, plans
Completed tasks	Bennett and Matt built the 18 x 18 inch sizing cube first. We found the rights nuts and bolts and completed the sizing cube. Daniel put a hub on the other side of the beacon button pressing device. he made a prototype for the pull-up bar arm. he did this by making a piece of plastic with a hook on the end that will, when released, will fling up and grab the bar and then winch up.
Robot improvement	Trevor and Josh worked on making the rescue arm work properly as well as fixing the robot.

Tasks	Reflections
Task in bold	Bullet point for each reflection
Workshop cleaning and programing	At the beginning of the meeting Justin cleaned the workshop; mainly the table which had about a robots worth of parts on it. Latter Justin did some programing for the pieces that deploy the zip lines.

Recorded by:	Date:	Journal Editor:	Date:

@@ Line 17: / Line 17: @@
 !Objectives / Systems !! Hypotheses, tests, observations, conclusions, plans
 |-
-| '''Objective in bold'''
+| '''Completed tasks'''
 |
-* Bullet point for each hypothesis, test, observation, conclusion, plan
+* Bennett and Matt built the 18 x 18 inch sizing cube first. We found the rights nuts and bolts and completed the sizing cube.
+* Daniel put a hub on the other side of the beacon button pressing device. he made a prototype for the pull-up bar arm. he did this by making a piece of plastic with a hook on the end that will, when released, will fling up and grab the bar and then winch up.
 |-
-| '''Objective in bold'''
+| '''Robot improvement'''
 |
+* Trevor and Josh worked on making the rescue arm work properly as well as fixing the robot.
+|-
 * Bullet point for each hypothesis, test, observation, conclusion, plan
@@ Line 37: / Line 40: @@
 * Bullet point for each reflection
 |-
-| '''Task in bold'''
+| '''Workshop cleaning and programing'''
 |
-* Bullet point for each reflection
+* At the beginning of the meeting Justin cleaned the workshop; mainly the table which had about a robots worth of parts on it. Latter Justin did some programing for the pieces that deploy the zip lines.
 |} <!-- End of tasks table; DO NOT REMOVE -->