Difference between revisions of "Nisso-Denko (Window) Motor Locking Pins"

From DEW Robotics
Jump to: navigation, search
Line 1: Line 1:
Team 1640's 2010 [http://en.wikipedia.org/wiki/Breakaway_(FIRST) ''BREAKAWAY''] robot, [[DEWBOT VI]] is equipped with a a novel, [[DEWBOT VI Creativity Award sponsored by Xerox (Philadelphia Regional) | award-winning]] multi-mode, [[4-Wheel Pivot Drive | 4-wheel independent pivot drive-train]].  Kit-of-Parts Nisso-Denko (Window) Motors were selected as steering motors for the four (4) pivots.  These steering motors are driven by tan Jaguar motor controllers.
+
Team 1640's 2010 [http://en.wikipedia.org/wiki/Breakaway_(FIRST) ''BREAKAWAY''] robot, [[DEWBOT VI]] is equipped with a novel, [[DEWBOT VI Creativity Award sponsored by Xerox (Philadelphia Regional) | award-winning]] multi-mode, [[4-Wheel Pivot Drive | 4-wheel independent pivot drive-train]].  Kit-of-Parts Nisso-Denko (Window) Motors were selected as steering motors for the four (4) pivots.  These steering motors are driven by tan Jaguar motor controllers.
  
 
1640 has experienced on-going, intermittant lock-up of the steering motors during practice and competition.  Symptoms are:
 
1640 has experienced on-going, intermittant lock-up of the steering motors during practice and competition.  Symptoms are:

Revision as of 12:32, 27 May 2010

Team 1640's 2010 BREAKAWAY robot, DEWBOT VI is equipped with a novel, award-winning multi-mode, 4-wheel independent pivot drive-train. Kit-of-Parts Nisso-Denko (Window) Motors were selected as steering motors for the four (4) pivots. These steering motors are driven by tan Jaguar motor controllers.

1640 has experienced on-going, intermittant lock-up of the steering motors during practice and competition. Symptoms are:

  • One pivot suddenly ceases to respond to control, becoming locked at current angle
  • Wheel drive (CIM) continues to operate. So do the other pivots' steering
  • Motor at low temperature when lock-up occurs, but rapidly becomes too hot to touch.
  • Jaguar LED indicates that full power is being provided to the locked motor.
  • Voltmeter confirms that full power (12 V) is being provided to the locked motor.
  • Either removing the Jaguar PWM cable, or "rebooting" the robot corrects the lock-up.
  • Lock-up has been experienced with all wheels, although it appears to occur more frequently with some (wheels 1 & 4) than others (2 & 3).
  • Anecdotally, lock-ups may be associated with aggressive steering maneuvers.