Search results

From DEW Robotics
Jump to: navigation, search

Create the page "/no" on this wiki! See also the search results found.

  • Steering Committee
    ...rk out their plans. The steering team goal is to make sure that there are no big issues. Most of the members of the steering team are also on a build t
    4 KB (532 words) - 10:57, 14 June 2017
  • FRC Team 1640
    ...operations is [[Fundraising Coordination Page | Fundraising]]. No money, no robots!
    18 KB (2,481 words) - 13:11, 12 March 2024
  • DEWBOT II
    :DEWBOT II is unique among 1640 robots (to-date) in having no pneumatic system.
    4 KB (697 words) - 14:31, 15 September 2012
  • DEWBOT III
    # Robot was logically laid-out and posed no significant maintenance problems No part of DEWBOT III was designed using [[CAD]].
    5 KB (753 words) - 21:00, 31 December 2012
  • DEWBOT V
    ...ed with pounds to spare. No features were sacrificed for weight savings. No last minute holes were drilled. ...ed to the bumper boards this year, with wing nuts used to secure these (so no tools required). There is good access to the wing nuts.
    12 KB (1,834 words) - 02:06, 12 August 2013
  • DEWBOT V Electrical
    ...The mounting system means that we only need access to one side there are no nuts to hold. Curved Tuffak parts that make up the lower ball scoop to p
    5 KB (861 words) - 18:45, 12 June 2009
  • DEWBOT V PARC XII
    Image:DB5_PARC_no_curry_09509_csm.jpg|''Misleading - There was no curry in the donuts - what a disappointment''
    3 KB (395 words) - 00:03, 10 May 2010
  • DEWBOT V Drive Train
    ...the trailer should help stabilize the robot (front-to-back) and there are no ramps to climb. Still, we endeavored to keep center-of-mass low and center Drive-train modeling showed no benefit to using (2) CIM motors per side, so (1) was employed. For control
    6 KB (944 words) - 00:16, 23 October 2009
  • 7th Wheel
    ...ee weighted, driven wheels provide an excellent pivot drive with little or no transverse wheel drag (excluding the trailer).
    6 KB (889 words) - 11:27, 23 January 2010
  • DEWBOT V Mechanical
    ...a Nisso-Denso motor via a chain drive at 22:12 step-up gearing providing a no-load Spindle speed of 2.6 rev/s and a stall torque of 4.3 ft lbf. Chain dr ...es the Spindle via a chain drive using 15:12 step-up sprockets providing a no-load Spindle speed of 5.1 rev/s and 9.9 ft lbf stall torque.
    12 KB (1,815 words) - 22:50, 7 March 2010
  • Steering Committee 2009-06-26
    ##Approved, no changes
    2 KB (414 words) - 16:35, 29 December 2011
  • DEWBOT IV Lift-Catapult
    ...(6) pulleys ((3) per cable). Pulleys were so positioned so that there was no need for a cable tensioner. A key here was to position pulleys co-axial to
    8 KB (1,323 words) - 01:42, 27 October 2009
  • DEWBOT IV Drive Train
    * Maintenance issue - there was no provision made to raise or lower individual wheels to put all (4) in-plane * Maintenance issue - No thought given to bumper removal & installation. Mentors could get old wait
    5 KB (737 words) - 14:57, 16 November 2014
  • VEX Driving
    ...rt. Narrow it down from here. Our team had p;enty of people who really had no interest in robotics, but the competition had criteria such as oral present
    3 KB (548 words) - 18:04, 3 August 2009
  • DEWBOT V Bridgewater Battle
    ...m about 1/8" gap under the 7<sup>th</sup> wheel or adjust to achieve this (no big, but needs to be done).
    3 KB (487 words) - 12:51, 30 May 2010
  • 2008 Drive-train Development
    ...and the outer ones are slave driven via chains. The sides are symmetrical No chain has ever broken, and only one lost tension once. '''DEWBOT IV Problem:''' No thought at all was given bumper removal and installation on DEWBOT IV. This
    6 KB (878 words) - 04:09, 29 October 2015
  • Provisional Dewbot V Chassis
    Middle wheels have no bearing blocks. Their drive shafts are cantalievered from the gearboxes.
    8 KB (1,165 words) - 04:11, 29 October 2015
  • Program Management
    This is the most difficult team to work on, the team has no power but needs to use influence and project management skills to make thin
    778 bytes (121 words) - 16:56, 17 June 2009
  • VEX Battery
    ...ot design the amount of motors is limited by the rules to a combination of no more than 10 motors and servos. But the battery will not run all 10 of the
    2 KB (337 words) - 14:36, 17 June 2009
  • Logistics Team
    ...pain to move (it's heavy at 120 lbs. and bulky) but comes with a 1/2 ton (no really, 1000 lbs.) of spare parts, tools, batteries, media material, etc.
    2 KB (343 words) - 23:40, 23 July 2010
  • Website Team
    .... We did this so we could focus our limited resources on content creation no programming.
    2 KB (389 words) - 13:41, 12 March 2010
  • Steering Committee 2009-07-31
    No change from June Naming protocol is being followed for all new postings. No noticable activity on revising old postings.
    4 KB (622 words) - 16:34, 29 December 2011
  • DEWBOT IV Week Five Build Season Photo Gallery
    Image:DB4_no_idle_hands_080206_csm.jpg|''no idle hands here...'' (Heather, Matt K, Siri & Mike Coll)
    5 KB (776 words) - 01:25, 25 February 2010
  • Engineering
    ....pdf | ''Running the Bump'' ]] - An analysis - can we run along the bump? (no)
    7 KB (1,000 words) - 02:28, 8 June 2017
  • Steering Committee 2009-08-28
    ##Approved no changes
    3 KB (527 words) - 16:34, 29 December 2011
  • Clean Sweep
    ...If you want to be a Mentor or you are an interested parent please come! (No roboteers please, they start the next week) [http://stemrobotics.org/mediaw :No problem, we have special starter kits that we will train you on the robot p
    5 KB (842 words) - 23:24, 2 May 2010
  • DEWBOT III Pittsburgh Regional
    :* Basically no Driver/Operator training. Our Drivers were getting OTJ training.
    1 KB (221 words) - 02:15, 25 February 2010
  • DEWBOT IV Control Software
    //No New Button Pressed, so keep last //If no commands are active set IR command Mode to #0 - FORWARD
    25 KB (2,791 words) - 00:55, 23 August 2009
  • DEWBOT II Drive Train
    The drive-train was reliable. I recall no drive-train failures.
    2 KB (279 words) - 00:14, 23 October 2009
  • 4-Wheel Pivot Drive
    There is no Gearbox. All reduction is accomplished using chains and sprockets (the Mit Unlike tank drives, all CIM motors drive in the same direction, so there is no left-to-right mismatch between motors' clockwise and counterclockwise perfo
    9 KB (1,410 words) - 14:42, 21 March 2018
  • DEWBOT II Week Five Build Season Photo Gallery
    Image:DB2_no_normal_clocks_060207_csm.jpg|''Why are there no normal clocks here?''
    3 KB (414 words) - 01:17, 25 February 2010
  • FRC 2010 Calendar
    |'''24''' No Meeting |'''22''' No Meeting
    7 KB (1,087 words) - 03:54, 20 December 2010
  • DEWBOT V Ramp Riot
    Other than the bad battery, there were no problems experienced with the robot. DEWBOT V has proven extraordinarily r
    3 KB (465 words) - 01:35, 26 November 2012
  • Steering Committee 2009-11-20
    ##No changes
    3 KB (533 words) - 16:24, 29 December 2011
  • Steering Committee 2009-12-18
    ##Approved with no changes
    3 KB (474 words) - 16:22, 29 December 2011
  • DEWBOT VI
    :DEWBOT VI has no provisions to Elevate or Suspend. ...T VI where the kicker is, as far as the drive system is concerned there is no front. If you rotate the robot 90 degrees to the right, what was the left
    28 KB (4,351 words) - 20:29, 15 September 2012
  • DEWBOT VI Build
    :*'''Tuesday - No meeting on Tuesday''' :*'''Friday - Rest for the weary, no meeting'''
    29 KB (4,611 words) - 13:35, 23 February 2010
  • DEWBOT VI Drive Train
    There is no Gearbox. All reduction is accomplished using chains and sprockets (the Mit Unlike tank drives, all CIM motors drive in the same direction, so there is no left-to-right mismatch between motors' clockwise and counterclockwise perfo
    11 KB (1,692 words) - 12:22, 27 January 2015
  • DEWBOT VI Mechanical
    :DEWBOT VI has no provisions to Elevate or Suspend. ...ng_bump_sideguards_100217_csm.jpg|Crossing bump with sideguards in-place - no problem
    14 KB (2,202 words) - 14:21, 12 July 2011
  • DEWBOT VI Programming
    ...T VI where the kicker is, as far as the drive system is concerned there is no front. If you rotate the robot 90 degrees to the right, what was the left s
    6 KB (1,002 words) - 13:28, 13 July 2010
  • DEWBOT VI Finger Lakes Regional
    ...elastic tubes and kicker latch wire ties. Side-guard eye-bolts were bent. No electrical issues excluding the sudden loss of communications in match 41.
    15 KB (2,463 words) - 13:37, 13 June 2010
  • DEWBOT VI Drive Train Team
    Team: There is no formal student drive train team. Except for a couple of programmers, I have There were no significant signs of wear or damage. Pivot 4 does not stand out, mechanica
    2 KB (367 words) - 15:36, 11 April 2010
  • DEWBOT VI Programming Team
    *Tried to get LabVIEW on DJ's Mac. No success. ...disable button) rapid-fire kicking. Wasn't allowed to happen very much -- no visible kicker damage. Major issue at first; though somehow (not deliberate
    23 KB (3,716 words) - 00:33, 12 July 2010
  • DEWBOT VI Tactical
    ...sider moving into the mid- or near zone if we need to score, or if there's no major need to play defense (this is usually a strategic alliance decision).
    13 KB (2,370 words) - 11:39, 10 July 2010
  • Clean Sweep Newsletter 24 November
    ...irt size. Choices are Adult extra small, small, medium, large and X-large (no kids sizes. Due to the large number of students they will need to pay for t
    3 KB (546 words) - 03:07, 17 January 2010
  • DEWBOT VI Scouting
    :Rationale: This is the point of the game, no? You can't play against (or with) what you don't know, and it's better to k ;There is no database for [[DEWBOT VI Bridgewater Battle | Bridgewater Battle]].
    17 KB (2,420 words) - 04:25, 12 November 2010
  • DEWBOT VI Week One Build Season Photo Gallery
    Image:DB6_Matt_Melanie_20100114_SMW_0013.jpg |No, it's measure twice cut once
    5 KB (679 words) - 16:37, 15 February 2011
  • DEWBOT VI Week Four Build Season Photo Gallery
    '''No pictures today, Downingtown got 16" of snow!''' The robot shop was closed,
    12 KB (1,784 words) - 00:37, 4 March 2010
  • DEWBOT VI Week Six Build Season Photo Gallery
    ...ng_bump_sideguards_100217_csm.jpg|Crossing bump with sideguards in-place - no problem ..._side_herding_100217_csm.jpg|Herding with robot side & sideguards. We can no longer drive over the balls from the sides.
    9 KB (1,391 words) - 20:24, 3 April 2011
  • DEWBOT VI Competition Team
    *No hanging device - not enough points, high risk *No correction device - solution is don't flip robot over
    2 KB (314 words) - 17:58, 23 October 2010
  • DEWBOT VI Chairmans Award
    ...days are popular gatherings and we attend the four closest to us. There is no event that we are invited to that we won't go, and we have brazenly begged ...ing mentor, who is disabled and not with us writes "I took a big risk with no mentors and little money and applied for the NASA grant with a dream of cre
    12 KB (2,105 words) - 02:52, 12 March 2010
  • Glossary
    ...They avoid treating anyone like losers. No chest thumping tough talk, but no sticky-sweet platitudes either. Knowledge, competition, and empathy are com
    7 KB (1,063 words) - 01:35, 25 November 2012
  • DEWBOT I Chairman's Award
    ...roject is that it breaks down barriers we have in school. Our teachers are no longer just teachers but also our companions because everyone is learning s
    14 KB (2,394 words) - 12:10, 12 March 2010
  • DEWBOT VI Drive Train Tread Wear
    ...dition of the pivot, steering and sensor. If it is not sound mechanically, no further analysis of the programming issues can be done. We have spares of a ...ery good. This should have nothing to do with lag. Remember the motors had no load on them then. When the robot is on the floor there is more friction. I
    17 KB (2,903 words) - 12:23, 27 January 2015
  • Steering Committee 2010-04-30
    ##Estimated 2010-2011 FRC-$30,500 (2 Regionals, 1 Championship, no Capital) ###No subteams without mentors
    4 KB (604 words) - 16:21, 29 December 2011
  • DEWBOT VI PARC XIII
    ...(Vulcan Robotics) & 341 against 303, 2053 (Tigertronics) & 222 - ''1640 a no-show''<br> ...in 9-4 with 25 (Raider Robotix) & 1143 against 2053, 341 & 2753 - ''1143 a no-show''<br>
    9 KB (1,385 words) - 13:42, 13 June 2010
  • DEWBOT VI Monty Madness
    ...bration and virtually necessitates a dashboard readout of the voltage. At no point during the competition was sensor data a useful indicator in teleop m ...arterfinal (probably a casualty of the battery problem). Did not replace (no time). This caused steering issues in the quarterfinals, in combination wit
    10 KB (1,623 words) - 13:43, 13 June 2010
  • DEWBOT VI Bridgewater Battle
    ::* No wheel calibration at the start of autonomous. Wheels need to be calibrated :* We scored no autonomous points. Problem was with the kicking. Initially, with the poss
    11 KB (1,807 words) - 16:26, 7 November 2010
  • DEWBOT VII
    ...with Bumpers - 14.2 lb<sub>m</sub> for the 2<sup>nd</sup> set of Bumpers - no-one paid attention during initial inspection). ...s a great space for robotics, allowing a full-scale practice field. Alas, no sense of permanence. Our 6<sup>th</sup> home (and by-far very best to-date
    18 KB (2,699 words) - 05:44, 30 December 2012
  • 2010 VEX Mentor of the Year
    The first night we attended was off season. There was no beginning instruction going on. My son was lost and ready to leave. Steve s
    4 KB (719 words) - 02:52, 3 May 2010
  • FIRST Tech Challenge
    Unlike FRC, there is no 'stop build day' when the robot has to be finished; teams can work on their
    2 KB (293 words) - 21:55, 28 September 2018
  • STEM Defined
    ...trations, including a roboto-a-roboto face off at the end of the evening. No robots were actually harmed during the course of the demo.
    5 KB (817 words) - 16:38, 15 February 2011
  • Nisso-Denko (Window) Motor Locking Pins
    Initial testing of the drive is promising. No lock-ups (yet). More testing is needed to know whether we've solved the pr
    4 KB (560 words) - 12:29, 27 January 2015
  • FIRST Robotics
    ...ea Robotics (or your local program) team as a student, mentor, or sponsor. No experience required!
    12 KB (1,739 words) - 22:53, 16 October 2012
  • Team 1640 2010 Summer Program
    ...excluding tread wear and carpet fiber accumulation on the transfer axle. No "broken" pivots as at [[DEWBOT VI PARC XIII | PARC]]. All steering sprocke :Adding friction tape to the bottom roller resulted in no observable improvement.
    24 KB (3,796 words) - 01:06, 10 August 2011
  • Resources Page
    ...s to some awesome resources provided by other teams/organizations. We have no rights or association with these--we're just glad the teams have made them
    9 KB (1,321 words) - 23:08, 27 July 2010
  • DEWBOT VI Possessor Development
    :Adding friction tape to the bottom roller resulted in no observable improvement. ...ested filling in the top roll spiral gaps with friction tape, but this had no obvious effect. Existing spirals are definitely not beneficial (they do no
    20 KB (3,300 words) - 16:39, 15 February 2011
  • DEWBOT VI Code Functional Specifications
    ...telop (P3). Initial answer (Paul): Theoretically? don't know, maybe. Now? no so much. Indicate possessor status: in/out/off and ball possession: ball/no ball on the dashboard throughout telop.<br>
    10 KB (1,542 words) - 16:47, 13 July 2010
  • DEWBOT VI IRI Problems Encountered
    ...d lost their angles, thus yielding entirely inconsistent (but mostly just "no ball") readings. We started to fix this on Friday but were sidetracked when ...the fourth band was so stubborn and/or that both the symptom and cause are no longer issues.
    8 KB (1,396 words) - 18:40, 9 August 2010
  • DEWBOT VI IRI Trip Reports
    ...(all of whom were more than twice my age) meet-and-greet. I felt ''very'' (no, ''very'') young, but it was still a great time. The "Hi, I'm...on CD" and :* Possessor no longer has a '''Vulcan Death Grip'''. More like a '''Hoboken Death Grip'''
    55 KB (9,882 words) - 16:39, 15 February 2011
  • Team 1640 Robot Cart
    *The RC is easy to steer through normal event venues (target: 1 person and no cursing, marginal: 2 people or cursing) ...the driver's station (target: 3.5'x6" with electricity, marginal: 2.5'x6" no electricity)
    3 KB (453 words) - 22:15, 20 July 2010
  • DEWBOT VI IRI Post-Mortem
    :* No fatal field failures. We played every scheduled match; through the match. ...d a communications problem between the Classmate and robot when tethered. No significant field failures. Most times, tethering through the router worke
    3 KB (524 words) - 01:02, 24 July 2010
  • DEWBOT XVIII Levitator
    # No Autonomous points and three (3) ROBOTS DOCKED and ENGAGED at match end) (30
    4 KB (634 words) - 16:07, 26 February 2023
  • DEWBOT X
    ...s no way to guarantee that we will even qualify for Championships in 2014, no less find ourselves on Einstein again, this objective will determine our ac ::* With a wide open field and no safe zones, we expect the field to look a lot like a demolition derby, but
    19 KB (2,840 words) - 21:44, 14 December 2014
  • Fundraising Coordination Page
    ::Status: no go - requires employee mentors. (I'll see again in 4 years...)
    2 KB (214 words) - 02:43, 18 February 2012
  • Steering Committee 2010-08-19
    ##No changes
    2 KB (300 words) - 16:19, 29 December 2011
  • DEWBOT VI Ramp Riot
    ...recedented level of driving practice, DEWBOT VI is OFFICIALLY RETIRED.''' No robot is 1640 history has seen this level of active use! DEWBOT VI is look
    7 KB (1,061 words) - 16:40, 15 February 2011
  • DEWBOT VII Design Team Page
    The primary factor affecting climb time is minibot mass. No big surprise here. The lighter, the faster.<br>
    6 KB (884 words) - 20:47, 11 April 2011
  • DEWBOT XIX
    DEWBOT XIX was ethically sourced. No students were harmed (or killed) while building the robot ''(yet)''.
    4 KB (517 words) - 22:52, 17 April 2024
  • DEWBOT VII Chairmans Award
    .... Our founding mentor, a physics teacher, writes: "I took a big risk with no mentors and little money…[but I had] a dream of creating a team that woul ...g mentor, who is disabled and not with us, writes, "I took a big risk with no mentors and little money and applied for the NASA grant with a dream of cre
    16 KB (2,673 words) - 22:21, 23 February 2011
  • DEWBOT VII Build
    '''Monday 10-January''' ''(no photos to speak of)'' :* Snow Storm - ''No Robotics tonight!''
    23 KB (3,294 words) - 22:53, 21 March 2011
  • DEWBOT VII Week Four Build Season Photo Gallery
    Image:DB7_not_rough_gussets_110130_csm.jpg|Gusssets; no longer rough
    7 KB (1,101 words) - 23:32, 3 April 2011
  • DEWBOT VII Drive Train
    If a 2010 pivot needed to be replaced with a spare, the process required no less than 30 minutes. On the two (off-season) occassions when pivots faile There is no formal Gearbox. All reduction is accomplished using belts, pulleys, chains
    13 KB (1,996 words) - 12:24, 27 January 2015
  • DEWBOT VII Drive Team Page
    ...painful 36-44 loss (Carly, Sasha, Andrew, Clem) - one alliance robot was a no-show<br> '''Elimination Match Record:''' 6-2 (no ties in Eliminations) - Winners<br>
    9 KB (1,259 words) - 23:47, 30 April 2011
  • DEWBOT VII Finger Lakes Regional
    While 1640 won no official awards at Finger Lakes, Team 2228 (''Cougar Tech'', Honeoye Falls, ...painful 36-44 loss (Carly, Sasha, Andrew, Clem) - one alliance robot was a no-show<br>
    6 KB (895 words) - 16:37, 14 April 2011
  • Special Steering Committee for Leaving DRC 2011-3-11
    :: No summer program
    6 KB (909 words) - 14:38, 18 October 2011
  • DEWBOT VII Minibot
    The primary factor affecting climb time is minibot mass. No big surprise here. The lighter, the faster.<br> ...is a child of Gary Deaver's imagination, fueled by Chief Delphi posts (and no small amount of caffeine).
    11 KB (1,719 words) - 15:57, 24 October 2011
  • DEWBOT VII Minibot Deployment
    ....1s). A good start, but the need to vent retraction-side air (even though no longer under pressure) through the solenoid with its small Cv slows extensi
    7 KB (1,043 words) - 15:22, 20 April 2011
  • DEWBOT VII Philadelphia Regional
    ...> alliance was beaten badly (26-82) and its fortunes appeared bleak. With no more time-outs, a back-up team (2607) was called in to replace 365; opposin '''Elimination Match Record:''' 6-2 (no ties in Eliminations) - Winners<br>
    12 KB (1,869 words) - 16:00, 20 May 2011
  • Steering Committee 2011-05-06
    ::PARC – Tunkhannock – 4-June – SAT’s day & no Christopher ...igate the 5th Gear drive simulation (Christopher & Maley) – but there is no pivot simulation
    4 KB (570 words) - 14:37, 18 October 2011
  • DEWBOT VII IRI Trip Reports
    ...loss of home and the cancellation of PARC and BR<sup>2</sup>, we have had no driving practice since [[DEWBOT VII FRC Championship|St. Louis]]. It's hard Our sonar is broken and we've got no spare. Autonomous was therefore shut off. On the positive side, this allo
    27 KB (4,835 words) - 10:41, 15 June 2013
  • Steering Committee 2011-07-28
    :*No change, no timeline, no current objects/feedback :*No video games
    6 KB (803 words) - 14:36, 18 October 2011
  • Team 1640 2011 Summer Program
    '''Julie Christopher is no longer available on this date.''' If someone else is available to hold a pr
    12 KB (1,777 words) - 14:27, 20 August 2011
  • DEWBOT VIII
    No doubt about it, [[DEWBOT VII]] is a very tough act to follow. Still, we've ...re very grateful to Waterloo Gardens for the use of this building. Again, no sense of permanence. Our 7<sup>th</sup> home to-date.
    24 KB (3,540 words) - 11:36, 20 April 2013
  • Steering Committee 2011-10-20
    :*FIRST is no longer producing the first generation light bulbs :*Current students are welcome to remain on the team – no issue with non-DASD students
    5 KB (654 words) - 16:52, 17 November 2011
  • DEWBOT VII Duel on the Delaware
    ...rom circulation (rather than swapping minibots, as had been our practice). No more such incidents after making this change,but we haven't yet identified #We had no in-pit or on-field injuries (though the lack of good gloves makes the latte
    10 KB (1,743 words) - 21:23, 4 October 2012
  • DEWBOT VII NEMO Mentors
    ...e moves because of Faith. Move 20+ people and a robot to 9 events a year? No problem, Faith has it covered.
    415 bytes (67 words) - 22:15, 23 October 2011
  • DEWBOT VII Ramp Riot
    ...and (7) chargers at the competition; and were able to trust all of them. No battery problems encountered. Good battery protocols are essential. Batte
    11 KB (1,650 words) - 04:58, 18 November 2011
  • Sponsors 2012
    ...nk our 2012 sponsors for their great support. Without them there would be no DEWBOT VIII, nor could we pursue any of our other activities.
    2 KB (237 words) - 17:20, 20 March 2012
  • Steering Committee 2011-11-17
    *Julie’s letter is out, but no response yet (not expected at this point)
    2 KB (291 words) - 16:13, 29 December 2011
  • DEWBOT VIII Week Two Build Season Photo Gallery
    Image:DB8_120121_csm-20.jpg|Shooter system (voltage control but no feedback)
    5 KB (680 words) - 23:23, 16 February 2012
  • DEWBOT VIII Drive Train
    ...t over the Barrier? 1640's pivots had always used 4" wheels in the past. No way they're going over a 4" Barrier, right? ...cal. All angle sensors are calibrated to the same relative zero point, so no calibration is needed with a pivot module swap.
    16 KB (2,396 words) - 12:25, 27 January 2015
  • DEWBOT VIII Hatsboro-Horsham
    With virtually no time for software & hardware testing or driver training before the robot wa ...an ''astounding'' job at his first official competition, with essentially no pre-competition practice. A smart driver and cool under pressure, he'll onl
    15 KB (2,414 words) - 00:00, 29 March 2012
  • DEWBOT VIII Chairmans Award
    ...to spearhead an educational revolution – one of science and technology. No one expected the student minority to preach the gospel of a great scientifi ...It will be clarified in next year's submission; apologies to Siri and Ben (no relation to the Ben hereinbelow).]
    15 KB (2,317 words) - 23:41, 3 April 2012
  • DEWBOT VIII Ball Collection and Storage
    ...t an elevation no lower than 4.5 in, together with a lower lift wheel also no lower than this elevation, could pinch a ball between them to lift it off t
    10 KB (1,598 words) - 00:38, 22 August 2012
  • Team 1640 2012 Summer Program
    ...edged drivetrain design project for students interested in design and CAD (no experience necessary). Originally, this was to be based on the 2010 FRC Gam
    5 KB (779 words) - 03:04, 26 November 2012
  • DEWBOT VIII Monty Madness
    Image:DB8_MM_120519_csm-22.jpg|...no, we're not
    3 KB (396 words) - 22:47, 20 April 2013
  • DEWBOT VIII Bridgewater-Raritan Battle Royale
    ...been to all of these, starting with the inaugural event in 2009 (there was no 2011 (BR)<sup>2</sup>). ...ttery Beak was used to confirm charge on all batteries going into robots. No battery problems were experienced in competition. We participated in 22 (m
    5 KB (734 words) - 13:43, 28 May 2012
  • News Archive 2013
    ...ce by the team, bringing us to a competitive level which had hitherto been no more than a dream.
    11 KB (1,627 words) - 11:20, 28 December 2016
  • DEWBOT VIII Bridge Manipulation
    * A stinger would therefore make no sense for us * The Bridge Arm would be articulated with two positions - no protrusion when raised - able to push the bridge down when lowered
    12 KB (1,824 words) - 00:23, 7 September 2012
  • DEWBOT VIII IRI Post-Mortem
    ...oke repeatedly (most notably the beaterbar and associated systems), we had no massive, diverse or fatal breakdowns. Nothing fully or even largely comprom ...it worked to manipulate the bridge quickly and easily in every match--with no maintenance required!
    9 KB (1,383 words) - 01:33, 10 August 2012
  • DEWBOT IX
    ...X Drive Train#Ocelot Drive | Ocelot]] drive-train software was developed. No doubt about it, DEWBOT's got the moves! ...ce by the team, bringing us to a competitive level which had hitherto been no more than a dream.
    20 KB (2,892 words) - 04:03, 29 October 2015
  • DEWBOT IX Design Team Page
    ...ses", but don't be surprised if they just sneak up on you in conversation. No lectures required!
    7 KB (1,096 words) - 22:56, 20 June 2013
  • DEWBOT IX Programming
    :No code deploy needed
    3 KB (404 words) - 00:52, 1 February 2013
  • DEWBOT IX CAD
    ...Drawings should include tolerances and full model views where appropriate. No one should ever be making a part whose function they do not understand!
    4 KB (519 words) - 21:48, 16 December 2012
  • Swerve Central
    * '''Stealth''' - no need to telegraph intentions via chassis reorientation * '''Minimal steering hysterisis''' - there is almost no need to overcome static friction in steering
    18 KB (2,732 words) - 02:39, 28 February 2023
  • DEWBOT IX Welding
    ...but you only get one chance to do a weld on the robot. So the answer is 'No'. The student must identify the piece which will be evaluated (the 'final' ...ch as "obsolete", "dinosaur" and "museum piece". But the truth is there's no more versatile welding process for the cost than stick welding. Steel, sta
    22 KB (4,000 words) - 03:11, 31 October 2015
  • DEWBOT VIII Ramp Riot
    ...hes, apparently from shock to the router (primarily crossing the barrier). No power failure. We will have a better router mounting system next season.
    6 KB (1,004 words) - 20:53, 18 November 2012
  • Sponsors 2013
    ...nk our 2013 sponsors for their great support. Without them there would be no DEWBOT IX, nor could we pursue any of our other activities.
    2 KB (311 words) - 23:27, 14 April 2013
  • DEWBOT IX Drive Train
    ...k 4" HiGrip Wheel (am-2256) - 32T sprocket secured w/ 10-32 x 5/8" SHCSs - No sprocket spacers needed ==Calibration - no change from [[DEWBOT VIII Drive Train#Pivot Calibration | last year's]]==
    8 KB (1,161 words) - 01:33, 19 February 2017
  • 1640 Logo Selection
    Though no longer highlighted options (after the 14-Nov meeting), elements of several
    9 KB (1,300 words) - 19:34, 23 June 2013
  • Prototyping Best Practices
    #Work as fast as you can, and no faster #Make it as simple as possible, and no simpler
    9 KB (1,359 words) - 05:47, 30 December 2012
  • DEWBOT IX Control
    ** At the moment, no motor reversal is planned.
    6 KB (860 words) - 20:44, 30 July 2013
  • 2013 Pivot Development
    ...k 4" HiGrip Wheel (am-2256) - 32T sprocket secured w/ 10-23 x 5/8" SHCSs - No sprocket spacers needed
    8 KB (1,177 words) - 12:16, 27 January 2015
  • FRC 2013 Calendar
    No Lunch Lunch: No Lunch
    14 KB (2,150 words) - 23:41, 3 February 2014
  • DEWBOT IX Caterpillar Drive
    ...gainst the pyramid's powder-coated surfaces, a tough requirement as we had no samples of the pyramid surface and saw this for the first time at [[DEWBOT
    10 KB (1,601 words) - 21:55, 3 January 2014
  • DEWBOT IX Hatboro-Horsham
    ...h our 1807 and eventual alliance captains 486, against 2607, 1923 and 103. No team was quite on their game yet, but we took the opportunity of a technica ...1 of 2 teleop shot. 9 points of the 67, and we spend the rest climbing to no avail. Our bad. Thanks MOE and 4342!
    14 KB (2,201 words) - 19:10, 11 May 2013
  • DEWBOT IX Saucer shooting & control
    There is no speed control on the motor, which is run at 100% while shooting.
    2 KB (344 words) - 23:21, 26 March 2013
  • DEWBOT IX FRC Championship
    ...ce by the team, bringing us to a competitive level which had hitherto been no more than a dream. Our drive team was awesome - any other description fall
    10 KB (1,488 words) - 13:57, 3 May 2017
  • FTC Team 7314
    :* Team is split into two schedules and no student attends every session listed above, but is encouraged to attend 2-3
    4 KB (587 words) - 16:24, 22 November 2018
  • Move to CCIU Technical College High School
    No incidents, no issues and no real difficulty.
    4 KB (613 words) - 22:29, 15 August 2013
  • Steering Committee 2013-08-29
    :No new developments on the Dorney Park event (Rizzo)
    3 KB (386 words) - 03:17, 30 August 2013
  • Boy Scouts of America Merit Badge Program
    ...expanding qualification to related badges if there is interest. (There is no fee to students pursuing a robotics merit badge, although there is a genera
    1 KB (197 words) - 16:25, 2 December 2013
  • FTC 7314 build September 2013
    ...ing Tetrix motors. Wheels are 4 inch. Driven wheels are directly driven (no gear reduction). No controller yet. We just ran the motors from the 12V battery using a switch
    8 KB (1,281 words) - 21:22, 1 December 2013
  • DEWBOT IX Battle-O'-Baltimore
    ...played in the eliminations. Alliance selection was normal (but there were no picks from within the top 8 seeds - not uncommon for off-season events), bu
    5 KB (726 words) - 12:57, 23 September 2013
  • Sponsors 2014
    ...nk our 2014 sponsors for their great support. Without them there would be no DEWBOT X, nor could we pursue any of our other activities.
    1 KB (182 words) - 06:25, 24 January 2014
  • FTC 7314 build December 2013
    But we have no way of getting blocks into the shovel! That is a matter for our next meetin
    3 KB (429 words) - 15:27, 23 December 2013
  • DEWBOT X Programming
    ''Integrated into overall robot project since no coding changes are expected''
    9 KB (1,344 words) - 21:20, 30 September 2014
  • FRC 1640 Punchlist
    *** Wheel initialization -- e.g. rotate 360 degrees (no shortest distance), then back 180 degrees
    3 KB (386 words) - 03:12, 24 February 2014
  • DEWBOT XVIII Arm
    The Elbow is driven by the Elbow Gearbox. There is no Wrist.
    5 KB (736 words) - 12:09, 27 February 2023
  • DEWBOT X Hatboro-Horsham Shooter Failure
    ...ro is started and the compressor is turned on, in that sequence. There is no pressure switch in the circuit (but there is a pressure relief valve). The ...ming isothermal compression. Supporting the isothermal assumption was: 1) no temperature increase was noted on the tank exterior surface (by touch); and
    9 KB (1,481 words) - 14:33, 18 March 2014
  • DEWBOT X Drive Train
    :* All motor power wires terminate in 4-conductor 40-amp Anderson Connectors (no more disconnecting at the motor controllers) ==Calibration - no change from [[DEWBOT VIII Drive Train#Pivot Calibration | 2012]]==
    5 KB (690 words) - 12:28, 27 January 2015
  • DEWBOT X Shooting
    ...onnecting the elastics from the tensioning mechanism; therefore there were no inertial or frictional penalties imposed on shooting by the tensioning syst
    10 KB (1,546 words) - 14:26, 15 November 2014
  • DEWBOT X Ball Handling
    ...uring competition. In spite of this, as of this writing, it has sustained no damage other than a loss of some paint. How was this accomplished? By des :* Durability (no repairs needed during competition season)
    10 KB (1,512 words) - 14:20, 15 November 2014
  • DEWBOT XI
    ...ht=1.1]]In contrast to last year, the team went to kick-off this year with no terrible oath hanging over our heads. Our only goal of real significance i ...Totes into the robot and automatically aligns them for stacking. No fuss, no muss. When open, presents a 23.75" Tote Acquisition width. When closed, t
    17 KB (2,646 words) - 20:56, 3 January 2016
  • DEWBOT X Design Philosophy
    ...on, then any failure could become (competitively) fatal and that there was no detail too small for attention. ...ty applied to FRC 1640. After all, we just make and compete with robots! No-one dies if our robot breaks.
    10 KB (1,518 words) - 14:41, 15 November 2014
  • FTC 7314 - 2013-2014
    ...scrimmage. Both [[FRC Team 1640 | FRC 1640]] and FTC 7314 participated. No, we weren't really ready for this, but it was a great experience.
    4 KB (652 words) - 03:24, 9 September 2014
  • FTC 7314 Engineering Notebook 2014-11-24
    ...(in no particular order) are the driver/backup driver. Braden and Amal (in no particular order) are operator/backup operator. These are all subject to ch
    4 KB (618 words) - 00:05, 4 December 2014
  • FTC 7314 Engineering Notebook 2014-09-27
    ...day off with some bad news. The rules prohibit Tetrix motors with modified/no gear box! So the motor they have been using for the past few weeks is illeg
    5 KB (868 words) - 18:44, 15 November 2014
  • FTC 7314 Engineering Notebook 2014-11-23
    ...obot flush to the wall, instead of an angle, so it would be more reliable. No one can expect the robot to be set up at the same angle every time. Now, it
    4 KB (638 words) - 23:19, 23 December 2014
  • FTC 7314 Engineering Notebook 2014-11-28
    ...d cut to 108 degrees that was used to form the previous goal guide. It was no where to be found, so she had to make another. This wood would hold the goa
    4 KB (633 words) - 23:36, 23 December 2014
  • FTC 7314 Engineering Notebook 2014-12-01
    ...The mentor then determined Laura killed the motor in the dremel. It could no longer be of any use. It was a sad day for FTC 7314. Luckily there was a sp
    4 KB (696 words) - 22:55, 11 January 2015
  • FTC 7314 Eastern Pennsylvania Qualifying Tournament 2014
    Image:FTC7314_Eastern_PA_QUAL_141206-25.jpg|Referee check - no fouls
    3 KB (512 words) - 14:24, 13 December 2014
  • FTC 7314 Engineering Notebook 2015-01-03
    * When the chain fell off we could no longer get more then 90 points and the axle was bent so the robot could no
    2 KB (273 words) - 03:25, 14 January 2015
  • News Archive 2014
    ...t]] at the Downingtown Area School District's board meeting. While we are no longer affiliated officially with DASD, Sab-BOT-age is a DASD team by birth
    13 KB (1,950 words) - 11:19, 28 December 2016
  • DEWBOT XI Build
    *Are we finished with CAD? NO *Snow day - no meeting
    13 KB (1,882 words) - 06:05, 16 February 2015
  • DEWBOT XI Drive Train
    ...eed encoders. A comparison of 2013 (no magnets), 2014 (magnets) and 2015 (no magnets - Mini-CIMs) weights supports this.
    5 KB (768 words) - 14:59, 20 September 2015
  • DEWBOT XI Week Five Build Season Photo Gallery
    No photos
    3 KB (499 words) - 03:32, 8 February 2015
  • Sponsors 2015
    ...nk our 2015 sponsors for their great support. Without them there would be no DEWBOT XI, nor could we pursue any of our other activities.
    2 KB (244 words) - 21:46, 8 June 2015
  • DEWBOT XI Internal Stacker
    ...mply dropping the stack and backing up to disengage, we determined to have no floor under the stack carried by the robot. These decisions led to a decis
    10 KB (1,642 words) - 22:30, 1 October 2015
  • Team 1640 2015 Summer CAD Certification
    ...problem (the X Box) as it's dimensioned in the old isometric view that is no longer used on the test because it's unnecessarily difficult to read. ...rawing techniques. The minimum passing grade is 70%, and each question has no partial credit. You'll might use:
    5 KB (748 words) - 17:09, 25 July 2015
  • How to Join
    ...40 accepts high school students, those entering grades 9-12 in September. No prior robotics experience is needed (but is welcome). We will teach the sk ...open to students in grades 7-12 (September), with a focus on 7-9. Again, no prior robotics experience is needed and the necessary skills will be taught
    3 KB (377 words) - 11:36, 16 August 2018
  • DEWBOT XII
    ...XII FRC Championship | FRC Championship]], but it was too slow and scored no points here. A faster version was installed for [[DEWBOT XII Indiana Robot
    12 KB (1,832 words) - 01:35, 6 May 2017
  • Sponsors 2016
    ...nk our 2016 sponsors for their great support. Without them there would be no DEWBOT XIII, nor could we pursue any of our other activities.
    2 KB (253 words) - 00:04, 23 January 2017
  • DEWBOT XI Indiana Robotics Invitational
    ...eptance criteria. The level of competitive play is astounding. There are no mediocre robots at IRI.
    7 KB (1,140 words) - 14:50, 27 September 2015
  • DEWBOT XI Maintenance
    Dewbot XI suffered no major breaks to its drive train or lift mechanism. The only major issue was ...ached with liberal amounts of glue and pins made from the backs of rivets. No major problems arose from the hooks until the first quarter final where the
    3 KB (451 words) - 17:28, 21 July 2015
  • FTC 7314 Engineering Notebook 2015-09-14
    ...than thirty seconds for floor auton, but who knows? Humans aren't robots, no matter how much they want to be.
    4 KB (748 words) - 23:20, 27 November 2015
  • FTC 7314 Engineering Notebook 2015-09-19
    * Using this summer's test chassis, we ran some climbing tests. No trouble with the low section and climbing the 30 deg ramp. The robot's 4"
    4 KB (671 words) - 02:45, 30 November 2015
  • FTC 7314 Engineering Notebook 2015-10-26
    * Once they finally got the code working, there was no problem reading red and blue, which is fortunate because those are the two
    5 KB (784 words) - 06:46, 4 December 2015
  • FTC 7314 Engineering Notebook 2015-11-04
    * Had to cut shaft on right side drive motor to fit. No modification needed to left side motor.
    3 KB (413 words) - 00:33, 17 November 2015
  • FTC 7314 Engineering Notebook 2015-11-16
    * Matt worked revised the engineering notebook to make sure there are no mistakes in the entries. Although content is most important, Matt would lik
    4 KB (631 words) - 07:22, 4 December 2015
  • FTC 7314 Engineering Notebook 2015-11-23
    ..., they had a lot of issues concerning the color sensor readings for white. No matter how much they looked over the code, they couldn't find the bug! (alt ...s run, something that wasn't paid attention to before. They found out that no readings at all were coming up for the white color. Before, they had consid
    5 KB (779 words) - 05:35, 3 December 2015
  • FTC 7314 Engineering Notebook 2015-11-28
    ...creating the initial cuts. He also attempted to climb up the mountain, to no avail. Justin is thinking of ways to make the make the climb a possibility,
    4 KB (640 words) - 12:20, 4 December 2015
  • News Archive 2015
    ...eptance criteria. The level of competitive play is astounding. There are no mediocre robots at IRI.
    12 KB (1,900 words) - 11:19, 28 December 2016
  • FTC 7314 Engineering Notebook 2015-12-28
    ...cube. This will be used to insure that we fit within the sizing cube with no issues.
    3 KB (416 words) - 04:27, 8 January 2016
  • SRX-MATE interface board
    *Surface mount design, no insulator required
    851 bytes (124 words) - 21:17, 3 January 2016
  • Stronghold Meeting - 12-Jan-2016
    -No CAD meeting, but Crayola CAD continues.
    3 KB (515 words) - 17:51, 27 January 2016
  • Stronghold Meeting - 30-Jan-2016
    :- Testing the vision program on the raspberry pi, there was no noticeable change in the processing algorithm
    2 KB (366 words) - 19:00, 16 February 2016
  • Stronghold Meeting -01-Feb-2016
    No CAD meeting tonight
    2 KB (274 words) - 19:11, 16 February 2016
  • Stronghold Meeting -07-Feb-2016
    :- We spent some time tuning, with no luck.
    3 KB (473 words) - 19:22, 16 February 2016
  • Stronghold Meeting -08-Feb-2016
    - We continued tuning the PID with no luck.
    2 KB (308 words) - 19:23, 16 February 2016
  • Stronghold Meeting -16-Feb-2016
    No CAD meeting tonight.
    703 bytes (96 words) - 20:53, 20 February 2016
  • Stronghold Meeting - 28-Jan-2016
    No CAD meeting tonight.
    2 KB (328 words) - 20:33, 15 February 2016
  • FTC 7314 Engineering Notebook 2016-02-13
    We are monitoring the battery performance. based on our research, we will no longer leave our batteries on the chargers over night. ...est version of FTC software from FIRST, communications has been good, with no unexpected faults.
    5 KB (708 words) - 01:51, 19 February 2016
  • FTC 7314 Engineering Notebook 2016-03-05
    ...the top would apply less force overall to the servo, meaning that it would no longer break. On top of this they plan to add support to the base of the se
    3 KB (462 words) - 23:40, 16 March 2016
  • DEWBOT XII Drive-Train
    ...rive-trains and Sab-BOT-age's drive-train weathered this abuse with almost no maintenance or repairs. # '''Rough Terrain''' is generally no problem other than it is too easy and in Autonomous we often go too far and
    15 KB (2,298 words) - 22:57, 13 May 2016
  • DEWBOT XII Portcullis Lift
    No modifications were made to the original mechanism from Bagging through FRC
    5 KB (764 words) - 22:58, 13 May 2016
  • How to Volunteer
    ...and also to apply for FIRST's Youth Protection Policy clearance. There is no cost associated with this clearance.
    4 KB (584 words) - 00:11, 30 May 2016
  • Steering Committee 2016-09-27
    ...to week 2 threw our normal approach to qualifier selection into disarray. No-one is eager to compete at Hatboro-Horsham in week 1 and Westtown in week 2
    758 bytes (112 words) - 17:26, 6 October 2016
  • Battery Management
    ...n an instant as they fell from a cart and landed on concrete. Fortunately no-one was hurt. :# Have no visible signs of damage to the battery case, relief valve, cables or connec
    10 KB (1,686 words) - 11:50, 22 April 2019
  • STEAMworks Meeting - 14-Jan-2017
    ...e many ideas for how to best hold the gears, but without the drop there is no way to properly test how the prototypes will catch the gears. Once we have
    6 KB (1,059 words) - 17:54, 5 February 2017
  • STEAMworks Meeting - 15-Jan-2017
    ...he ball intake, tweaking the design, trying to compact it, and making sure no balls would get stuck in the mechanism. Sam, Braden, Cameron, and Will cont
    3 KB (445 words) - 17:55, 5 February 2017
  • STEAMworks Meeting - 19-Jan-2017
    No students present for the meeting. Bumper CAD was edited, tachometer was des
    1 KB (233 words) - 17:56, 5 February 2017
  • STEAMworks Meeting - 21-Jan-2017
    * No turreted shooter
    4 KB (632 words) - 04:40, 29 January 2017
  • STEAMworks Meeting - 14-Feb-2017
    There is a requirement that the highest knot on the rope be no closed than 29" from the RF.  This rule should not present any problems fo
    2 KB (327 words) - 15:36, 14 February 2017
  • FRC 2017 Calendar
    |'''9''' '''No Meeting due to snow'''
    14 KB (2,243 words) - 10:55, 20 March 2018
  • DEWBOT XIII Rope Climber
    ...original climber]]At 50 points per robot, SteamWorks' endgame climb is in no way optional. Climbing makes up a large portion of a typical match's total
    5 KB (802 words) - 16:07, 7 May 2017
  • DEWBOT XIII Drive Train
    Our old standard steering motor, the BaneBots RS540, is no longer on the FRC approved list. It was replaced by the AndyMark 9015 moto ...in the modules' top plates. So far, this has been a positive change with no issues observed. The original 1" top flanged bearing (McMaster 6384K373) r
    4 KB (669 words) - 15:41, 12 November 2019
  • DEWBOT XIII FRC Championship
    ...mbing. What to do? What to do? We must replay the match, of course! Oh no! Fortunately, it turned out to be a 458 - 219 blow-away. On to Einstein.
    8 KB (1,320 words) - 15:06, 5 May 2017
  • Ag Robot
    * 12 VDC battery power supply – no voltage >24 VDC * Wireless communications - No tether
    5 KB (808 words) - 00:21, 9 June 2018
  • Sponsors 2017
    ...nk our 2017 sponsors for their great support. Without them there would be no DEWBOT XIII, nor could we pursue any of our other activities.
    2 KB (262 words) - 01:52, 4 June 2018
  • Sponsors 2018
    ...nk our 2018 sponsors for their great support. Without them there would be no DEWBOT XIV, nor could we pursue any of our other activities.
    2 KB (263 words) - 20:41, 25 December 2018
  • Sponsors 2019
    ...nk our 2019 sponsors for their great support. Without them there would be no DEWBOT XV, nor could we pursue any of our other activities.
    2 KB (240 words) - 02:02, 4 June 2018
  • DEWBOT XIV Week One Build Season Photo Gallery
    No photos.
    2 KB (351 words) - 19:43, 15 January 2018
  • FRC 2018 Calendar
    |'''29'''NO MEETING |'''30''' '''MUST BE OUT OF CCIU''' NO MEETING
    14 KB (2,223 words) - 21:49, 4 January 2019
  • DEWBOT XIV Hatboro-Horsham
    ...nts to be more than they think they can be and his calming presence leaves no room for Sabotage.''
    6 KB (886 words) - 18:10, 8 April 2018
  • DEWBOT XV
    ...e will not go to kickoff as a team. Reason is: 1) no field pieces; and 2) no seminars. We will hold our own kickoff at Exton Mall.
    10 KB (1,413 words) - 13:30, 12 December 2019
  • DEWBOT XIV Havoc
    We really had no scouting at HAVOC.
    6 KB (938 words) - 23:30, 8 October 2018
  • DEWBOT XIV Ramp Riot
    ...atches ranked 7<sup>th</sup> in a field of 36 teams 3-2-0. Since there is no in-picking at Ramp Riot, we were the 7<sup>th</sup> alliance captain, invit
    6 KB (937 words) - 05:46, 6 November 2018
  • Downingtown FLL Regional Qualifying Tournament 2018
    ...our 7<sup>th</sup> Downingtown RQT. (25) teams participated (there was a no-show); six advance to the PennFLL Championships.
    5 KB (822 words) - 15:38, 10 December 2018
  • News Archive 2018
    ...atches ranked 7<sup>th</sup> in a field of 36 teams 3-2-0. Since there is no in-picking at Ramp Riot, we were the 7<sup>th</sup> alliance captain, invit
    13 KB (1,918 words) - 21:46, 4 January 2019
  • DEWBOT XV Week One Build Season Photo Gallery
    No photos.
    3 KB (427 words) - 15:24, 20 January 2019
  • DEWBOT XV Week Two Build Season Photo Gallery
    No Photos.
    1 KB (196 words) - 12:56, 30 January 2019
  • DEWBOT XV Week Five Build Season Photo Gallery
    No Photos
    2 KB (331 words) - 19:14, 13 February 2019
  • News Archive 2019
    ...p>th</sup> seed (of 30 teams) and led the 5<sup>th</sup> alliance (there's no in-picking at Duel). Our thanks to alliance partners 6226 (Blue Devils) and
    10 KB (1,427 words) - 16:03, 21 February 2023
  • DEWBOT XVI
    ...y following the FTC model. Can 1640 adjust? Can the mentors adapt? With no clock to tell us to stop building, will be simply work on the robot until w No-one died.
    5 KB (698 words) - 13:05, 10 March 2022
  • DEWBOT XV Duel on the Delaware
    ...p>th</sup> seed (of 30 teams) and led the 5<sup>th</sup> alliance (there's no in-picking at Duel). Our thanks to alliance partners 6226 (Blue Devils) and
    7 KB (1,119 words) - 12:23, 25 October 2019
  • DEWBOT XV The Road to China
    Okay. Technically, there's no "Road to China" insofar as there is no dry land route from Exton PA to the Peoples Republic of China. I get it. ...ction (in retrospect, of course she did; the hammer involved was certainly no Mjölnir). We ended up paired with team 9047 (Detector) from Shenzhen (深
    11 KB (1,742 words) - 14:11, 19 December 2019
  • DEWBOT XVI Build
    ...y following the FTC model. Can 1640 adjust? Can the mentors adapt? With no clock to tell us to stop building, will be simply work on the robot until w
    2 KB (222 words) - 14:13, 17 February 2020
  • DEWBOT XV PTO Gearbox
    ...and the lift which raises them. So high speed and moderate force needed. No mechanical locking is needed for the lift. The motors can support the mass
    2 KB (337 words) - 16:32, 6 November 2019
  • DEWBOT XVI Week Two Build Season Photo Gallery
    No photos - sick No photos - sick
    2 KB (306 words) - 20:21, 1 February 2020
  • DEWBOT XVI Week Three Build Season Photo Gallery
    No photos
    3 KB (409 words) - 21:26, 1 February 2020
  • DEWBOT XVI Climber
    ...tive solution requires folding down the climber after hanging (so at least no more than 12 inches of climber extension extends beyond the frame perimeter
    8 KB (1,167 words) - 20:09, 16 March 2020
  • DEWBOT XVI Spinner
    ...ed by rotating the alliance's '''Control Panel''' three full rotations and no more than five full rotations.
    4 KB (633 words) - 12:31, 27 February 2020
  • DEWBOT XVI Drive-Train
    ...through this larger diameter rotating element via an off-axis bevel gear. No more miter gears, transfer axle and chain. Eliminating this rotational axi ...k loads, is ¼" G-10 fiberglass composite. The top plate still exists but no longer plays a structural role. Rotational elements are printed from PETG
    5 KB (794 words) - 21:14, 17 February 2022
  • DEWBOT XVII
    DEWBOT XVII was ethically sourced. No students were harmed it its manufacture (yet, at least).
    6 KB (896 words) - 05:55, 15 February 2023
  • DEWBOT XVII Week One Build Season Photo Gallery
    No photos No photos
    1 KB (185 words) - 21:24, 18 January 2022
  • DEWBOT XVII Week Two Build Season Photo Gallery
    No Photos
    1 KB (139 words) - 02:47, 23 January 2022
  • DEWBOT XVII Drive Train
    ...ad to be relocated to make it coaxial with the rotating elements. There's no pinion. The 2022 transmission comprised:
    5 KB (755 words) - 19:37, 22 March 2022
  • DEWBOT XVII Hatboro-Horsham
    Image:DB17_Hatboro-Horsham_20220306-51.jpg|...but no. DEWBOT falls!
    10 KB (1,413 words) - 11:46, 23 March 2022
  • DEWBOT XVIII
    DEWBOT XVIII was ethically sourced. No students were harmed while building the robot ''(yet)''.
    5 KB (689 words) - 01:08, 7 August 2023
  • DEWBOT XVIII Drive-Train
    ...e printed Pulley & Gear. The old pulley had been prone to failure and was no longer readily available. The 11T pulley allows 1640 to use NEO 550 motors
    6 KB (894 words) - 00:04, 1 March 2023
Retrieved from "https://team1640.com/wiki/index.php/Special:Search"